Panasonic DVD-LX110 Operating Instructions Manual

Also see for DVDLX110 - PORTABLE DVD PLAYER: Operating instructions Operating instructions

Contents

26 RQT823126Using On-Screen MenusMain menusOther SettingsPlay Menu (Only when the elapsed play time can be displayed,[JPEG] [SD[PICTURE] : The Repeat and Marker functions can be used.)1 Press [34] to select the menu.2 Press [1] to go to the next menu and [34] to set.Repeat step 2 if necessary.≥ Items shown differ depending on the type of software.≥ Press [2] to go to the previous menu.≥ There are items which you can select using the numbered buttonsand [ENTER] on the remote control.≥ If the setting does not change, press [ENTER].≥ To exit the screen: Press [RETURN].Program, Group, TitleChapter, Track, PlaylistContentTo start from a specific item≥ Press [3 4] to select and press [ENTER].≥ Press and hold [34] to alter faster.TimeTo skip incrementally or decrementally (Time Slip for play only) (Except iR/iRW)1. Press [ENTER] twice to show Time Slip indicator.2. Press [3 4] to select the time and press [ENTER].≥Press and hold [34] to alter faster.To start from a specific time (Time Search) (Except iR/iRW)e.g. Playback from 1 hour 46 minutes and 50 seconds (Enter using the remote control) :[1] ➜ [4] ➜ [6] ➜ [5] ➜ [0] ➜ [ENTER]To change remaining/elapsed time displayVideo To display pixel numberAudio (➜ page 18, Changing soundtracks)To display the current bitrate or sampling frequencyStill Picture To switch still pictureThumbnail To show thumbnail imagesSubtitle (➜ page 19, Changing subtitles)Marker (VR) To recall a marker recorded on DVD recordersAngle (➜ page 19, Angle select)Rotate Picture (➜ page 19, Still picture rotation)Slideshow To turn on/off slideshowTo change the slideshow timing (“1 Fast” to “5 Slow”)≥ When using Slideshow, Skip/Rotate picture may not work correctly depending on the play position.Other Settings (➜ See below)Play Speed (➜ page 17, Changing play speed)Repeat (➜ page 16, Repeat play)A-B Repeat (➜ page 16)MarkerExcept [DVD-VR]To mark up to 5 positions to play again[ENTER] (The unit is now ready to accept markers.)To mark a position: [ENTER] (at the desired point)To mark another position: [2 1] to select “¢”➜ [ENTER]To recall a marker: [2 1] ➜ [ENTER]To erase a marker: [2 1]➜ [CANCEL] (Remote control)≥ This feature doesn’t work during program and random play.≥ Markers you add clear when you open the disc lid, remove the card,press [AV SELECT] or switch the unit to standby.Advanced Disc Review (➜ page 17)DISPLAY1Press once.ENTER2Using On-Screen Menus