Panasonic DVD-RA60 Operating Instructions Manual

Also see for DVDRA60 - DIG. VIDEO DISCPLAYE: Operating instructions

RQT627022 Home TheaterThis unit has built-in Dolby Digital and DTS decoders (➡ page 25).You can enjoy the powerful movie theater and hall-like sound available with Dolby Digital and DTS by connecting an amplifier with 5.1-channelinput terminals. You do not need to purchase separate Dolby Digital or DTS decoders.Use analog connection to enjoy audio recorded with high sampling frequencies (over 48 kHz). Some of this material is copy-guardedand will be down-sampled if you use digital connection.What you want to doNote≥The equipment connections described are examples.≥Peripheral equipment and optional cables sold separately unless otherwise indicated.≥Before connection, turn off all equipment and read the appropriate operating instructions.To enjoy 5.1-channel surroundsoundTo enjoy stereo or Dolby ProLogic23 [A]SettingsReferencepageSpeaker SettingSelect “Multi-channel”.20[Digital\connection]Connect to an amplifier withbuilt-in decoder or a separatedecoder-amplifier combination.23 [B] PCM Down ConversionDolby DigitalDTS Digital SurroundChange the settings to suitthe equipment you connect.Make the speaker settings onthe amplifier or decoder.21—[Analog\connection]Connect to an analog amplifieror system component.24 [C]24 [D][Digital\connection]Connect to a digital amplifier orsystem component.PCM Down ConversionChange the settings to suitthe equipment you connect.Dolby Digital andDTS Digital SurroundSelect “PCM”.21[Analog\connection]Connect to an amplifier with5.1-channel audio inputterminals.ReferencepageHow to do itHome Theater—Enjoying more powerful soundRecording to cassette tapes or digital recording equipment∫ Digital recordingYou can record the digital signal directly to digital recording equip-ment.When recording DVDs, the signals must be converted to a signal therecording equipment can handle. Use analog connection if the sig-nals are copy-guarded.To make a digital recording1. Connect the recording equipment with an optical digital audiocable (➡ [D] page 24).2. When recording DVDs, make the following settings.ADVANCED SURROUND (V.S.S.): OFF (➡ page 11)PCM Down Conversion: Yes (➡ page 21)Dolby Digital and DTS Digital Surround: PCM (➡ page 21)∫ Analog recordingYou can record to a cassette deck or other recording equipment.Using analog connection means sound will be unaffected by thecopy guards found on DVDs.To make an analog recordingConnect the recording equipment with an audio cable (➡ [C] page 24).