Panasonic DVD-RP56 Operating Instructions Manual

23Home TheaterRQT6012PCM Down ConversionSelect “No”.What you want to doHome Theater–Enjoying more powerful soundThis unit can play Dolby Digital, but only in two channels. This unit does not have a DTS decoder. You must connect a unit with a Dolby Digital orDTS decoder to enjoy surround sound.Use analog connection to enjoy audio recorded with high sampling frequencies (over 48 kHz). To protect the rights of the producers ofthis kind of material, this audio will be down-sampled to 48 kHz if you use digital connection.To enjoy 5.1-channel surroundsoundTo enjoy stereo or Dolby ProLogicSettingsReferencepage[Digital\connection]Connect to an amplifier withbuilt-in decoder or a separatedecoder-amplifiercombination.23 [A] PCM Down ConversionSelect “Yes”.Dolby DigitalDTS Digital SurroundSettings depend on yourdecoding equipment.Make the speaker settings onthe amplifier or decoder.22–[Analog\connection]Connect to an analog amplifieror system component.24 [B]24 [C][Digital\connection]Connect to a digital amplifier orsystem component.PCM Down ConversionSelect “Yes”.Dolby DigitalSelect “PCM”.DTS Digital SurroundSelect “Off”.22ReferencepageHow to do it22BASS PLUSSelect “ON”.To enjoy heavy bass with asubwooferConnect an active subwoofer. 24 14OPTICALLRSUB-WOOFERAUDIO OUT VIDEOOUT S VIDEOOUTDIGITAL AUDIO OUT(PCM/BITSTREAM)OPTICALBack of the unitAmplifierOptical digital audio cableDo not bend when connecting.Insert fully, withthis side facingup.Adjust the settings to suit the equipment you have connected (á “Digital output” page 22).NoteYou cannot use DTS Digital Surround decoders not suited to DVD.SpeakersYou can enjoy surround sound by connecting fromthree to six speakers.Example: Six speakersº Other usesRecording to MDs or cassette tapes (á page 24).Note³The equipment connections described are examples.³Peripheral equipment and optional cables sold separately unless otherwise indicated.³Before connection, turn off all equipment and read the appropriate operating instructions.»A Connecting an amplifier with a built-in decoder or a decoder-amplifier combination