18 RQT7772SpecificationsSignal system: PAL 625/50, PAL525/60, NTSCOperating temperature range: i5 to i35 oCOperating humidity range:5 to 90 % RH (no condensation)Discs played (8 cm or 12 cm):(1) DVD-RAM (DVD-VR compatible, JPEG formatteddiscs)(2) DVD-Video (3)DVD-R (DVD-Video compatible)(4) CD-Audio (CD-DA) (5)Video CD(6) SVCD (Conforming to IEC62107)(7) CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3,WMA, JPEG formatted discs)(8) MP3/WMA§≥Compatible compression rate:MP3: between 32 kbps and 320 kbpsWMA: between 48 kbps and 320 kbps(9) JPEG§≥Exif Ver 2.1 JPEG Baseline files≥Picture resolution:between 320k240 and 6144k4096 pixels(sub sampling is 4:2:2 or 4:2:0)(10) HighMAT Level 2 (Audio and Image)Video output:Output level: 1 Vp-p (75 ≠)Output terminal:[The\United\Kingdom\and\Continental\Europe]Pin jack (1 system)/AV[Others] Pin jack (1 system)S-video output:Y output level: 1 Vp-p (75 ≠)C output level: NTSC; 0.286 Vp-p (75 ≠)PAL; 0.300 Vp-p (75 ≠)Output terminal:[The\United\Kingdom\and\Continental\Europe] AV[Others] S terminal (1 system)Component video output:[NTSC: 525 (480)p/525 (480)i, PAL: 625 (576)p/625 (576)i]Y output level: 1 Vp-p (75 ≠)P B output level: 0.7 Vp-p (75 ≠)P R output level: 0.7 Vp-p (75 ≠)Output terminal:Pin jack (Y: green, PB : blue, PR: red)Number of terminals: 1 systemRGB video output:[The\United\Kingdom\and\Continental\Europe]R output level: 0.7 Vp-p (75 ≠)G output level: 0.7 Vp-p (75 ≠)B output level: 0.7 Vp-p (75 ≠)Output terminal: AVAudio output:Output level: 2 Vrms (1 kHz, 0 dB)Output terminal:[The\United\Kingdom\and\Continental\Europe]Pin jack/AV[Others] Pin jackNumber of terminals: 2 channel: 1 systemAudio performance:(1) Frequency response:≥DVD (linear audio):4 Hz–22 kHz (48 kHz sampling)4 Hz–44 kHz (96 kHz sampling)≥CD Audio: 4 Hz–20 kHz(2) S/N ratio:≥CD Audio: 115 dB(3) Dynamic range:≥DVD (linear audio): 100 dB≥CD Audio: 98 dB(4) Total harmonic distortion:≥CD Audio: 0.0025 %Digital audio output:Coaxial digital output: Pin jackPickup:Wave length: 662 nm/785 nmLaser power: CLASS 2/CLASS 3ANORSKPickup:Bølgelengde: 662 nm/785 nmLaserstyrke: Ingen farlig stråling sendes utPower supply:[The\United\Kingdom,\Australia\and]N.Z.]AC 230–240 V, 50 Hz[Continental\Europe\and\Russia] AC 230 V, 50 Hz[Others] AC 220–240 V, 50/60 HzPower consumption: 9 WPower consumption in standby mode: approx. 1 WDimensions (WkDkH): 430 mm k249 mmk52 mmMass: 2.4 kg[Note]Specifications are subject to change without notice. Massand dimensions are approximate.§The total combined maximum number of recognizableaudio and picture contents and groups: 4000 audio andpicture contents and 400 groups.Safety precautionsSet the unit up on an even surface away from directsunlight, high temperatures, high humidity, and excessivevibration. These conditions can damage the cabinet andother components, thereby shortening the unit’s servicelife. Do not place heavy items on the unit.Do not use high voltage power sources. This canoverload the unit and cause a fire. Do not use a DCpower source. Check the source carefully when settingthe unit up on a ship or other place where DC is used.Ensure the AC mains lead is connected correctly andnot damaged. Poor connection and lead damage cancause fire or electric shock. Do not pull, bend, or placeheavy items on the lead.Grasp the plug firmly when unplugging the lead. Pullingthe AC mains lead can cause electric shock. Do nothandle the plug with wet hands. This can cause electricshock.Do not let metal objects fall inside the unit. This cancause electric shock or malfunction.Do not let liquids get into the unit. This can causeelectric shock or malfunction. If this occurs, immediatelydisconnect the unit from the power supply and contactyour dealer.Do not spray insecticides onto or into the unit. Theycontain flammable gases which can ignite if sprayed intothe unit.Do not attempt to repair this unit by yourself. If sound isinterrupted, indicators fail to light, smoke appears, or anyother problem that is not covered in these instructionsoccurs, disconnect the AC mains lead and contact yourdealer or an authorized service center. Electric shock ordamage to the unit can occur if the unit is repaired,disassembled or reconstructed by unqualified persons.Extend operating life by disconnecting the unit from thepower source if it is not to be used for a long time.PlacementVoltageAC mains lead protectionForeign matterServiceSpecifications/Safety precautions