Panasonic DVD-S100 Operating Instructions Manual

Contents

Panasonic DVD-S100 Operating Instructions Manual Manual pdf 12 page image

RQTC014712Linked operations with the TV (EZ SyncTM “HDAVI Control TM ”)EZ Sync “HDAVI Control” is a convenient function that offers linkedoperations of this unit, and a Panasonic TV (VIERA) or amplifier under“HDAVI Control”. You can use this function by connecting the equipmentwith the HDMI cable. See the operating instructions for connectedequipment for operational details.≥EZ Sync “HDAVI Control”, based on the control functions provided byHDMI which is an industry standard known as HDMI CEC (ConsumerElectronics Control), is a unique function that we have developed andadded. As such, its operation with other manufacturer’s equipment thatsupports HDMI CEC cannot be guaranteed.≥It is recommended that you use Panasonic’s HDMI cable.Recommended part number:RP-CDHG15 (1.5 m/4.9ft), RP-CDHG30 (3.0 m/9.8ft), RP-CDHG50 (5.0m/16.4ft), etc.≥Non-HDMI-compliant cables cannot be utilized.Preparation1 Connect this unit to your TV or amplifier with an HDMI cable (➜ 5 ).2 Set “EZ Sync” to “On” (➜ 16, “HDMI” menu).(The default setting is “On”.)3 Set the “HDAVI Control” operations on the connected equipment(e.g., TV).≥When using HDMI2 terminal of VIERA as HDAVI Control, set theinput channel to HDMI2 on VIERA.4 Turn on all “HDAVI Control” compatible equipment and select thisunit’s input channel on the connected TV so that the HDAVI Controlfunction works properly.Also when the connection or settings are changed, repeat thisprocedure.When the following operations are performed the TV will automaticallyswitch the input channel and displays the corresponding action.– When play starts on the unit– When an action that uses the display screen is performed (e.g.,Direct Navigator screen)When the TV is off and the following operations are performed, the TVwill automatically turn on and displays the corresponding action.– When play starts on the unit– When an action that uses the display screen is performed (e.g.,Direct Navigator screen)All connected equipment compatible with “HDAVI Control” includingthis unit is automatically set to standby mode when you set the TV tostandby mode.≥This unit is automatically set to standby mode even during playbackor any other operation.≥Only this unit is set to standby mode when you press the standby/onbutton of the unit or the remote control for shutting it down. Otherconnected equipment compatible with “HDAVI Control” stays on.[Note]Not all 2007 DVD players are compatible with all the features of all the2007 Ez Sync products.What is EZ Sync “HDAVI Control”? What you can do with “HDAVI Control”Automatic input switchingPower on linkPower off linkWhen [1] (PLAY) is pressed on this unit for “Automatic input switching”or “Power on link”, the playback image is not immediately displayed onthe screen and it may not be possible to watch the contents from whereplayback started. In this case, press [:] or [6] to go back to whereplayback started.When you want to leave the TV on and set only this unit tostandby modePress [Í DVD] on this unit’s remote control and set to standby mode.When not using “HDAVI Control”Set “EZ Sync” in the setup menu to “Off” (➜ 16, “HDMI” menu).Linked operations with the TV12