Panasonic DVD-S325 Operating Instructions Manual

Contents

RQTC010216 Changing the player settingsChanging the player settings1Shows Setup menu.SelectRegister2Select the tab.3Select the item. Make the settings.4 5Press to exit.Select SelectRegisterThe settings remain intact even if you switch the unit to standby.Underlined items are the factory preset.“DISC” tabSETTING STATE Display the current setting of the items belowAUDIOChoose the audio language.ENGLISH (LANGUAGE OPTIONS)]1 ORIGINAL]2OTHER ----]3SUBTITLEChoose the subtitle language.AUTO]4 ENGLISH (LANGUAGE OPTIONS)]1OTHER ----]3MENUSChoose the language fordisc menus.ENGLISH (LANGUAGE OPTIONS)]1 OTHER ----]3RATINGSSet a ratings level to limitDVD-Video play.Setting ratings (When level 8 is selected)0 LOCK ALL: To prevent play of discs without ratingslevels.1 to : To prohabit play of DVD-Video with correspondingratings recorded on them.8 NO LIMIT: To play all discs.When setting a ratings level, a password screen is shown.Follow the on-screen instructions.Do not forget your password.A message screen will be shown if a DVD-Videoexceeding the ratings level is inserted in the unit. Followthe on-screen instructions.PASSWORDChange the password for“RATINGS” (è above).1. Select “CHANGE” and press [ENTER].When “PASSWORD” is displayed, set thepassword according to “RATINGS” (è above)2. Enter the current password with the numberedbuttons, then press [ENTER].3. Enter the new password with the numbered buttons,then press [ENTER].If “VERIFY” is displayed, please verify the passwordand insert it again.•••nRegister“VIDEO” tabSETTING STATE Display the current setting of the items belowTV ASPECTChoose the setting tosuit your television andpreference.4:3PAN&SCAN 4:3LETTERBOX 4:3ZOOM16:9NORMAL 16:9SHRINK 16:9ZOOMTV TYPESelect to suit the type oftelevision.STANDARD CRT LCD PROJECTION PLASMANTSC DISC OUTChoose PAL60 or NTSCoutput when playingNTSC discs.NTSC: Output signals from NTSC discs remain as NTSC.PAL60: NTSC disc can be viewed on PAL television.Asia : “NTSC” is factory preset.STILL MODESpecify the type ofpicture shown whenpaused .AUTOFIELD: The picture is not blurred, but picture quality is lower.FRAME: Overall quality is high, but the picture may appearblurred.VIDEO OUT-SCART]5Choose the video signalformat to be outputfrom the SCART andCOMPONENT VIDEOOUT terminals(è page 5).VIDEO/YPbPrS-VIDEO/YPbPrRGB/NO OUTPUTVIDEO OUT (I/P)Select“PROGRESSIVE”only if connecting toa progressive outputcompatible television.INTERLACE PROGRESSIVEWhen you select “PROGRESSIVE”, a message screen willappear.For progressive output, press [e] and then press [ENTER].Press [RETURN] to cancel.••n