Panasonic DVD-S35 Operating Instructions Manual

Also see for DVD-S31: Operating instructions Operating instructions

Contents

RQT693316 Advanced operationsUsing On-Screen Menu IconsOn-Screen Menu Icons are menus that contain information about the discor unit and allow you to perform operations by changing this information.1 Press [DISPLAY].Each time you press the button:Disc information (➜ right) )Progress indicator (➜ below)e vOriginal display(------------------- Unit information (➜ page 17)2 [Unit\information\only]While the leftmost icon is highlightedPress [3, 4] to select the menu.Each time you press the button:Play Menu()Picture Menu()Audio Menu()Display Menu^------------------------------------------------------------------------------------J3 Press [2, 1] to select the item.4 Press [3, 4] to select the setting.≥Change items with “3” or “4” above and below with [3, 4] (press[ENTER] if the setting doesn’t change).≥Change numbered items with the numbered buttons and press[ENTER].≥Read the following explanations for other items.≥Depending on the condition of the unit (playing, stopped, etc.) and thetype of software, there are some items that you cannot select or change.To clear the menusPress [RETURN] until the menus disappear.∫ To change the position of the icons1. Press [2, 1] to select the Bar Position icon.2. Press [3, 4] to move the icons. (There are 5 positions.)Indicates how far you have played through an item.Changing the time display [RAM] [DVD-A] [DVD-V] [VCD] [CD]Press [3, 4] to show the elapsed play time or remaining time for theprogram, play list, track or title (or chapter during program and randomplay).Elapsed play time [VCD] (SVCD only) [WMA] [MP3]For display only, cannot be changed.Changing play speed [DVD-V] (Dolby Digital only)You can slow down or speed up play.Press [2] (slower) or [1] (faster).There are five speeds:a0.8 ,. a0.9 ,. a1.0 (normal speed) ,. a1.2 ,. a1.4≥After you change the speed:jOutput is in stereo,jYou cannot use ADVANCED SURROUND,jDigital output switches to PCM.≥Sound is stereo as long as “a1.0” is orange.To return to normal playPress [1] (PLAY).Common proceduresSLEEPA.SRDCINEMAD.ENHGROUPDIRECT NAVIGATORTOPMENUDISPLAYSUBTITLE AUDIO ANGLE/PAGE QUICK REPLAYRETURNMENUPLAY LISTSKIPSTOPPLAYSLOW/SEARCHCANCELSETUP OPEN/CLOSE32198S1007654PAUSEENTERCANCELRETURN1DISPLAY3, 4, 2, 1ENTERSLEEPA.SRDCINEMAD.ENHGROUPDIRECT NAVIGATORTOPMENUDISPLAYSUBTITLE AUDIO ANGLE/PAGE QUICK REPLAYRETURNMENUPLAY LISTSKIPSTOPPLAYSLOW/SEARCHCANCELSETUP OPEN/CLOSE32198S1007654PAUSEENTERCANCELRETURN1DISPLAY3, 4, 2, 1ENTERNumberedbuttonsDisc informatione.g.[DVD-V][RAM] PG: Program number PL: Play list number[DVD-A] G: Group number T: Track number[DVD-V] T: Title number C: Chapter number[VCD] [CD] T: Track number[WMA] [MP3]G: Group number T: Track number in group[JPEG]G: Group number P: Picture number in groupTime [RAM] [DVD-A] [DVD-V]≥Press [3, 4] to show the elapsed play time or remainingtime for the program, play list, group, track or title (orchapter during program and random play).≥Select a position to start play by specifying a time with thenumbered buttons and press [ENTER].Changing the time display [VCD] [CD]Press [3, 4] to show the elapsed play time, remaining timefor the track, or remaining time for the disc.Elapsed play time [VCD] (SVCD only) [WMA] [MP3]For display only, cannot be changed.Audio mode (➜ page 14, Soundtracks)Soundtrack language(See [A] on page 14 for language abbreviations.)Audio signal type(See [B] on page 14 for details.)Karaoke vocal on/off (Karaoke DVD only) [DVD-V]Solo: OFF or ONDuet: OFF, V1 i V2, V1 or V2Current bitrate [WMA] [MP3]Current sampling frequency [WMA] [MP3]Subtitle language(See [A] on page 14 for language abbreviations.)Subtitles on/offON()OFFTrack information on/off [WMA] [MP3] [CD] (CD text only)ON()OFFPicture information [JPEG]Full: Group title, picture title, picture size, file size, date ofshooting, and camera model used§.Date: Date of shooting only.OFF: No display.§ Actual displays depend on the camera and data.Angle number (➜ page 14)Track/picture number in disc [WMA] [MP3] [JPEG]Total number of tracks/pictures on disc[WMA] [MP3] [JPEG]Menu play [VCD]Indicates whether menu play (playback control) is on or off.Still picture number [DVD-A]Selected picture is shown during play.Slideshow setting [JPEG]ON()OFFSlideshow timing [JPEG]0 – 30 secProgress indicatore.g. [DVD-V] Current positionCondition – play, pause, or slow/searchRQT693317 Advanced operationsPlay MenuAudio MenuDisplay MenuDisplay MenuPicture MenuUser mode: Press [1] while “U1” or “U2” is highlighted and thenpress [3, 4] to select “1” or “2”.U1:User mode 1U2:User mode 2(Video output mode ➜above)Unit informationA-B repeat [RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3](When the elapsed play time is displayed)Repeat a section between points A and B within an item.[ENTER] (start point) ➜ [ENTER] (finish point)To cancel: [ENTER]≥Subtitles recorded around A and B may fail to appear.≥The end of an item becomes point B when it is reached.≥A-B repeat is canceled when you press [QUICK REPLAY].Repeat mode (➜ page 9)Play mode display [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]---: Normal play PGM: Program playRND: Random play ALL: All group play ([DVD-A])Marker[RAM] : 999 positions[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] :5 positions[ENTER] (The unit is now ready to accept markers.)To mark a position: [ENTER] (at the desired point)To mark another position: [2, 1] ➜ [ENTER]To recall a marker: [2, 1] ➜ [ENTER]To erase a marker: [2, 1] ➜ [CANCEL][RAM]To mark the eleventh point and beyond1. Press [2, 1] to select the marker pin icon.2. Press [3, 4] to select “11–20”.≥You can select the next group when thecurrent group is full.3. Press [1].≥The markers are ordered by time. Thismeans that the marker numbers can change when you addand erase markers.≥If places have been marked (e.g., with a DVD videorecorder), they are displayed.≥You can clear existing markers, but they are restored whenyou open the disc tray or switch the unit to standby.≥This feature doesn’t work while using a play list.[Note]≥This feature doesn’t work during program and random play.≥Markers you add clear when you open the disc tray orswitch the unit to standby.ADVANCED SURROUND (➜ page 15)DIALOGUE ENHANCER (➜ page 15)4:3 AspectSelect how to show images made for 4:3 aspect screens ona 16:9 aspect television.Normal: Laterally stretches images made for a 4:3 screen.Auto: Expands suitable 4:3 letterbox images to fill more ofthe screen. Other images appear in full in thecenter of the screen.Shrink: Images appear in the center of the screen.Zoom: Expands all images to fill the screen.If your television has a similar feature, use it instead for abetter effect.Zoom (➜ page 15)To select preset aspect ratioPress [ENTER] and then [2, 1] to select. Press [ENTER] tofinish.1–10Subtitle Position/Brightness (➜ page 14)Bitrate Display on/off [RAM] [DVD-V] [VCD]When you select “ON”:During play: Shows the average bitrate (approximatevalues) of the video being playedWhile paused: Shows the data volume of the frame and typeof picture (➜ back cover, Glossary—I/P/B)While the display is on, press [2, 1] to change the display:e [2, 1]uOSD Brightness (j3 to i3)Adjust the brightness of the on-screen displays.Picture mode (➜ page 15, CINEMA)N: Normal modeC1:Mellows images and enhances detail in dark scenesC2:Sharpens images and enhances detail in dark scenesU1/U2:User mode (➜ below)Video output mode480I: Interlace video480P: Progressive video(¢: Progressive output not possible with PAL signals)≥You can change the video output mode only when“Progressive Out (Component)” in the SETUP menu is setto “Enable” (➜ page 18).≥When progressive output is on, closed captions will not bedisplayed.Transfer modeSelect the method of conversion for progressive output tosuit the type of material being played.Auto 1 (normal): For viewing film materialAuto 2: For viewing film material (the same as Auto 1, butable to convert 30-frame-per-second progressivevideo)Video: For video materialContrast (j7 to i7)Increases the contrast between light and dark parts of thepicture.Brightness (0 to i15)Brightens the picture.Sharpness (j7 to i7)Adjusts the sharpness of the edges of the horizontal lines.Color (j7 to i7)Adjust the shade of the picture’s color.Gamma (0 to i5)Brightness of dark parts of the picture.9.438 MbpsBitrateCur. 7.507 MbpsAve. 6.730 Mbps5.0MbpsA record of bitrates for asampling period.Current bitrateAverage bitrate