Panasonic DVD-S42 Operating Instructions Manual

Also see for DVD-S42: Operating instructions

RQT870811Press [ADVANCED SURROUND] to select “SP 1”,“SP 2”, “HP 1” or “HP 2”.SP (Speaker) 1 (Natural) SP 2 (Enhanced)HP (Headphone) 1 (Natural) HP 2 (Enhanced) Off≥ When using discs recorded with surround sound, sound seems to come fromspeakers on either side of you.≥ When using headphones from the connected equipment, select “HP 1” or “HP 2”.≥ Optimum seating position is 3 to 4 times the distance between the front left and rightspeakers or the width of the television if using the television’s speakers.≥ Do not use in combination with surround effects on other equipment.≥ This does not work when Night Sound Mode or H.Bass (➜ page 10) is on..[DVD-VR] [DVD-V] (Discs recorded with 48 kHz only) [VCD] [CD]≥This feature gives you a more natural sound by adding the higher frequency signalsnot recorded on the disc, for example, playing DVD-Video recorded with 48 kHz at 96kHz. (➜ page 22, “Sampling frequency” in Glossary)[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz, 32 kHz)This feature reproduces the higher frequencies lost during recording to give you asound closer to the original.Press [MULTI RE-MASTER] to select “1”, “2” or “3”.≥ When connecting with COAXIAL terminal, the actual output sampling frequencydepends on “PCM Digital Output” setting in “Audio” tab (➜ page 19).≥ This may not work depending on the disc’s recording.≥ This does not work when Night Sound Mode, H.Bass (➜ page 10) or AdvancedSurround (➜ above) is on.≥ This does not work with [MP3] on DVD-RAM or DVD-R/RW..1 Press [FUNCTIONS].2 Press [3 4] to select “Other Settings”and press [1] .3 Press [3 4] to select “Play Menu” and press [1].4 Press [3 4] to select “Repeat” and press [1].5 Press [3 4] to select an item to be repeated and press [ENTER].≥ Depending on the disc, the items that can be selected will differ.Press [QUICK REPLAY] to skip back a few seconds.≥ This may not work depending on the disc’s recording.≥ This does not work with +R/+RW.Convenient when you want to skip commercials etc.During play, press [CM SKIP].≥ This may not work depending on the play position.≥ [DVD-VR] Does not work:– with parts containing still pictures.– when playing a playlist.During play, press [PLAY SPEED] to select“Fast”, “Normal ” or “Slow”.Fine adjustmentsWhile the menu is displayedPress [2 1] to increase or decrease the playingspeed from k0.6 to k1.4 in 0.1 units.≥ Press [1] (PLAY) to return to the normal play.≥ After you change the speed– Night Sound Mode, H.Bass (➜ page 10 ), Advanced Surround (➜ left), Multi Re-master (➜ left ) and Sound Enhancement (➜ page 17 ) do not work.– Digital output switches to PCM.– 96 kHz sampling frequency is converted to 48 kHz.≥ This may not work depending on the disc’s recording.Enjoying virtual surroundMotion pictures with 2 or more channelsReproducing more natural audioADVANCEDSURROUND Advanced SurroundFunctionsAdvanced Surround SP 1MULTI RE-MASTERMulti Re-masterMulti Re-master 1FunctionsSetting [DVD-V] [CD] (LPCM)Type of musicOther discsEffect level1 High tempo (e.g., pop and rock) Light2 Various tempos (e.g., jazz) Medium3 Low tempo (e.g., classical) StrongOff Off OffRepeat play (Only when the elapsed play time can be displayed[JPEG]: you can use this feature even if the elapsed time is notdisplayed.)Quick replay (Only when the elapsed play time can be displayed)[DVD-VR] [DVD-V] [WMA] [MP3] [VCD] [CD]Skipping a minute forward[DVD-VR] [DVD-V] (Except iR/iRW)Changing play speed [DVD-VR] [DVD-V]FUNCTIONSQUICK REPLAYCM SKIPPLAY SPEEDFunctionsPlay SpeedSlowx1.4 NormalFastConvenient functions