Panasonic DVD-S47EE Operating Instructions Manual

Also see for DVD-S47: Operating instructions Operating instructions

RQT75537Enjoying higher quality audio and videoBy pressing just one button the disc type is automatically determined andthe best audio and video settings are configured.Press [AV ENHANCER] to select “On”.Reduce the rough noise in the background to give a greater feeling ofdepth.Press [DEPTH ENHANCER] several times to select from “0”through “+4”.≥ This does not work while using Cinema1 or 2 (➜ page 11, Picture Mode).[RAM] [DVD-V] (Discs recorded with 48 kHz only)[DVD-A](Discs recorded with 44.1 kHz and 48 kHz only)[VCD] [CD]This feature gives you a more natural sound by adding the higherfrequency signals not recorded on the disc.[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz and 32 kHz)This feature reproduces the frequencies lost during recording to give youa sound closer to the original.Press [MULTI RE-MASTER] to select“1” “2” or “3”.≥ The actual output sampling frequency depends on “PCM Digital Output”setting in “Audio” tab (➜ page 12).AV EnhancerWhen AV Enhancer is on, you cannot change the settings indicatedbelow.Audio settings:Multi Re-master (➜ below), Advanced Surround (➜ page 11),Dialogue Enhancer (➜ page 11)Video settings:Picture Mode (➜ page 11)Depth EnhancerMulti Re-masterSetting [DVD-A] [DVD-V] [CD] (LPCM/PPCM)Type of musicOther discsEffect level1 High tempo (e.g., pop and rock) Light2 Various tempos (e.g., jazz) Medium3 Low tempo (e.g., classical) StrongOff Off OffThe above indicated features may not work depending on the discsrecording.AV ENHANCERMenuAV Enhancer OnDEPTHENHANCERDepth Enhancer 0MULTIRE-MASTERMenuMulti Re-master 1Changing the play sequences[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]While stopped, press [PLAY MODE].Each time you press the button:All group ([DVD-A]) > Program > Random^-------------Off (Normal play),-----------b≥ Disable HighMAT disc play to use random and program play.Select “Play as Data Disc” in Other Menu (➜ page 11).∫ All Group playPress [1] (PLAY).∫ Program play (up to 32items)1 Press the numbered buttons toselect the items ([WMA] [MP3] [JPEG]then press [ENTER]).Repeat this step to program other items.2 Press [1] (PLAY).Selecting all the items(on the disc or in the title or group)Press [ENTER] and [3 4] to select “ALL”, then press [ENTER] again toregister.Changing the programPress [3 4] to select an item.–To change an item, repeat step 1.–To clear an item, press [CANCEL] (or select “Clear” and press [ENTER]).≥ Press [ANGLE/PAGE] to skip 8 lines at a time.Clearing the whole programSelect “Clear all” and press [ENTER]. The whole program is also clearedwhen the unit is turned off or the disc tray is opened.∫ Random play1 ([DVD-A] [DVD-V] [WMA] [MP3] [JPEG])Press the numbered buttons toselect a group ([WMA] [MP3] [JPEG]then press [ENTER]) or a title.2 Press [1] (PLAY).To exit the all group, program or random modePress [PLAY MODE] several times while stopped.(Only when the elapsed play time can be displayed[JPEG]: Works with all JPEG content.)Press [REPEAT] several times to selectan item to be repeated.All group/Program/Random playRepeat playPLAY MODEAll Group PlaybackPress PLAY to startChoose a title and chapter.No. TimeTitlePlayClearClear allChapter11Press PLAY to startRandom Playbackto select to startTitleChoose a title.1PLAY0 ~ 9e.g. [DVD-V]REPEATRepeat OffMenuEnjoying higher quality audio and video/Changing the play sequences