Panasonic DVD-S49 Operating Instructions Manual

Also see for DVD-S49: Operating instructions

8 RQT8112Basic playStandby/on switch (Í/I)Press to switch the unit from on to standby mode or vice versa. In standby mode, theunit is still consuming a small amount of power.≥ To play JPEG, MPEG4 or DivX video contents on DVD-RAM that contain both [RAM]and another format (e.g. [JPEG]), select “Play as Data Disc” (➜ page 15, Other Menu).≥ “D.MIX” on the display indicates that a soundtrack with three or more channels can bedown-mixed to two channels (➜ page 23, Glossary).≥ Discs continue to rotate while menus are displayed. Press [∫] when you finish topreserve the unit’s motor and your television screen.≥ Total title number may not be displayed properly on iR/iRW.AVENHANCERADVANCEDDISC REVIEWCM SKIPQUICK REPLAYCANCELSKIPDIRECT NAVIGATOR PLAY LISTMENUTOP MENUSTOP PAUSE PLAYSLOW/SEARCHQUICK OSD FL SELECT OPEN/CLOSE1 2 34 57 8 90 106RE-MASTERMULTIREPEATDEPTH ENHANCER241POWERPauseStop1Power ON. 2Open the disc tray.3Load the disc. 4Start play.Remote control sensor≥ Load double-sided discs so the label for the side you want to play is facing up.≥[RAM] Remove discs from their cartridges before use.Skip≥ [RAM] [DVD-RW[‹VR›] Can also skip to the markers.StopThe position is memorized when “!” flashes on the display.≥ Press [1] (PLAY) to resume.≥ Press [∫] to clear the position.≥ Even after the unit is turned off, the position is memorized(Normal playback only).Search (during play)Slow-motion (during pause)≥ Up to 5 steps≥ Press [1] (PLAY) to restart play.≥ [VCD] Slow-motion: forward direction only≥ [MPEG4] [DivX] Slow-motion: Does not work.Pause≥ Press [1] (PLAY) to restart play.Displaying current playbackcondition ➜ page 9If you are experiencing problems, refer to troubleshooting guide (➜ page 21–22).Basic play8