RQTC01563Caution for AC Mains Lead(For The United Kingdom and Republic of Ireland)(“EB” area code model only)For your safety, please read the following text carefully.This appliance is supplied with a moulded three pinmains plug for your safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure thatthe replacement fuse has a rating of 5-ampere and that itis approved by ASTA or BSI to BS1362.Check for the ASTA mark [AM] or the BSI mark [BS] on thebody of the fuse.If the plug contains a removable fuse cover you mustensure that it is refitted when the fuse is replaced.If you lose the fuse cover the plug must not be used untila replacement cover is obtained.A replacement fuse cover can be purchased from yourlocal dealer.CAUTION!IF THE FITTED MOULDED PLUG IS UNSUITABLEFOR THE SOCKET OUTLET IN YOUR HOME THENTHE FUSE SHOULD BE REMOVED AND THE PLUGCUT OFF AND DISPOSED OF SAFELY.THERE IS A DANGER OF SEVERE ELECTRICALSHOCK IF THE CUT OFF PLUG IS INSERTED INTOANY 13-AMPERE SOCKET.If a new plug is to be fitted please observe the wiringcode as stated below.If in any doubt please consult a qualified electrician.IMPORTANTThe wires in this mains lead are coloured in accordancewith the following code:Blue: Neutral, Brown: Live.As these colours may not correspond with the colouredmarkings identifying the terminals in your plug, proceedas follows:The wire which is coloured Blue must be connectedto the terminal which is marked with the letter N orcoloured Black or Blue.The wire which is coloured Brown must be connected tothe terminal which is marked with the letter L or colouredBrown or Red.WARNING: DO NOT CONNECT EITHERWIRE TO THE EARTH TERMINAL WHICH ISMARKED WITH THE LETTER E, BY THEEARTH SYMBOL OR COLOUREDGREEN OR GREEN/YELLOW.THIS PLUG IS NOT WATERPROOF—KEEPDRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the typeof AC mains plug (figures A and B). Confirm the ACmains plug fitted and follow the instructions below.Illustrations may differ from actual AC mains plug.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach the fuse cover.Caution for AC Mains Lead/Safety precautionFuse coverFuse(5 ampere)Fuse(5 ampere)Set the unit up on an even surface away from directsunlight, high temperatures, high humidity, and excessivevibration. These conditions can damage the cabinet andother components, thereby shortening the unit’s servicelife. Do not place heavy items on the unit.Do not use high voltage power sources. This canoverload the unit and cause a fire. Do not use a DCpower source. Check the source carefully when settingthe unit up on a ship or other place where DC is used.Ensure the AC mains lead is connected correctly andnot damaged. Poor connection and lead damage cancause fire or electric shock. Do not pull, bend, or placeheavy items on the lead.Grasp the plug firmly when unplugging the lead. Pullingthe AC mains lead can cause electric shock. Do nothandle the plug with wet hands. This can cause electricshock.Do not let metal objects fall inside the unit. This cancause electric shock or malfunction. Do not let liquidsget into the unit. This can cause electric shock ormalfunction. If this occurs, immediately disconnect theunit from the power supply and contact your dealer.Do not spray insecticides onto or into the unit. Theycontain flammable gases which can ignite if sprayed intothe unit.Do not attempt to repair this unit by yourself. If sound isinterrupted, indicators fail to light, smoke appears, or anyother problem that is not covered in these instructionsoccurs, disconnect the AC mains lead and contact yourdealer or an authorized service centre. Electric shockor damage to the unit can occur if the unit is repaired,disassembled or reconstructed by unqualified persons.Extend operating life by disconnecting the unit from thepower source if it is not to be used for a long time.PlacementVoltageAC mains lead protectionForeign matterServiceSafety precautionRQTC0156-B.indd 3 2007-12-29 10:13:23