RQTC0157NIOIDUA LR OEDIV NI OEDIVS NI NIOIDUA LR TNENOPMOC NIOEDIV SCART (AV) INAVDo not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.Turn off all equipment before connection and read the appropriate operating instructions.Connect the terminals of the same colour.••••TelevisionYou can connect the audio cable to the 2-channelaudio input terminals of an analog amplifier orsystem component to enjoy stereo sound.To enjoy progressive videoConnect to a progressive output compatible television.Set “VIDEO OUT-SCART” to “VIDEO/YPbPr” for componentterminals. ( page 17, “VIDEO” menu).Set “VIDEO PRIORITY” to “OFF” ( page 18, “HDMI” menu).Set “VIDEO OUT (I/P)” to “PROGRESSIVE”, then follow theinstructions on the menu screen ( page 17, “VIDEO” menu).Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i . 60pinput terminals are progressive compatible.••••When using this connection, the audio cable(red and white plugs) should also be connected.With COMPONENT VIDEO INWith VIDEO IN or S VIDEO INAudio/videocable(included)Audio/video cable(included)Not used VideocablesBack of the unitS video cableConnection to a televisionSTEP 1 ConnectionConnection21-pin SCARTcableWith SCART (AV) INIf the television is compatible withS-video, set “VIDEO OUT-SCART” to“S-VIDEO/YPbPr”, or compatible withRGB, select “RGB/NO OUTPUT”for the AV terminals ( page 17,“VIDEO” menu). Also, set “VIDEOPRIORITY” to “OFF” ( page 18,“HDMI” menu) when “RGB/NOOUTPUT” is selected.•6RQTC0157-E.indd 6 2007-12-11 9:57:15