Panasonic Diga DMR-EH695 Operating Instructions Manual

Contents

59RQT9277Setting menusThis function works only when the elapsed play time is displayed.Select the item for repeat play. Depending on the disc, the items thatcan be selected will differ.§ Only when you have set “Progressive” to “On” in the Setup menu(> 66).Press [STATUS].The display changes each time you press the button.≥TV audio typeSTEREO: STEREO stereo broadcastM 1/M 2: Bilingual dual-sound broadcastM 1: Monaural broadcastPlay menu—Change the play sequenceRepeat Play≥All≥Chapter≥Group≥PL (Playlist)≥Title≥Track[CD] [VCD][HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL][+RW] [DVD-V] [-RW‹VR›]WMA/MP3 (except [USB])[HDD] [RAM] [-RW‹VR›][HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL][+RW] [DVD-V] [-RW‹VR›][CD] [VCD] and WMA/MP3 (except [USB])Select “Off” to cancel.Picture menu—Change the picture qualityPlayback NRReduces noise and picture degradation.Progressive§ (> 85)Select “On” to enable progressive output.Select “Off” if the picture is stretched horizontally.Transfer§ [When “Progressive” (@ above) is set to “On”.]Select the method of conversion for progressive output to suitthe type of title being played (> 84, Film and video).When the output signal is PAL(When the tray is opened, the setting will return to “Auto”.)≥Auto:≥Video:≥Film:Automatically detects the film and videocontent, and appropriately converts it.Select when using “Auto”, and the content isdistorted.Select this if the edges ofthe film content appearjagged or rough when“Auto” is selected.However, if the videocontent is distorted asshown in the illustrationto the right, then select “Auto”.When the output signal is NTSC≥Auto 1(normal):≥Auto 2:≥Video:Automatically detects the film and videocontent, and appropriately converts it.In addition to “Auto 1”, automatically detectsfilm contents with different frame rates andappropriately converts it.Select when using “Auto 1” and “Auto 2”, andthe content is distorted.Input NR (Only when AV1, AV2, AV3 or DV is selected)Reduces the noise while recording.≥Automatic:Noise reduction only works on picture input from a video tape.≥On:Noise reduction works for input video.≥Off:Noise reduction is off. You can record the input signal as it is.Sound menu—Change the sound effectDialogue Enhancer[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]and DivX(Dolby Digital, 3-channel or over only, including a centre channel)The volume of the centre channel is raised to make dialogueeasier to hear.Other menu—Change the display positionPosition1–5:The higher the setting the lower the on-screen menu moves.Status messages13:50 XP18:53:50 11.10. T1 0:05.14 XP  T2 0:00.10 XPRemainPlay 15:05:13Live 15:10:46RECPLAYSTEREOL RDVD RECHDDSelected drive status/type of disc or USBmemoryTV audio type being received (@ below)Recording or play status/input channelSelected audio typeAvailable recording time andrecording modeTitle number and elapsed time during play/Recording modeDate and timeNo displayRecording drive/Copy progress indicatorTitle number and elapsed time during recording/Recording modeThe remaining time appears here whilestopped.Current time≥When using Pause Live TVThe time when the picture currently displayed on thetelevision was broadcasted