Panasonic Diga DMR-ES10EB Operating Instructions Manual

Also see for Diga DMR-ES10EB: Quick setup guide Service manual Service manual

RQT801623 Playing backOperations during playStopPress [g].The stopped position is memorized.When stopped position is memorized (resume), the indicator appears in theunit’s display. (Excluding when playing from the Direct Navigator and whenplaying a playlist.)Resume play functionPress [q] (PLAY) to restart from this position.Stopped position• If [g] is pressed several times, the indicator disappears and the position is cleared.• The position is cleared if the unit is turned off or the tray is opened.Pause Press [h].Press again or press [q] (PLAY) to restart play.SearchPress [t] or [y].• The speed increases up to 5 steps.• Press [q] (PLAY) to restart play.• Audio is heard during first level search forward.Audio is heard during all levels of search. (excluding moving picture parts)• Depending on the disc, searching may not be possible.Skip While playing or paused, press [u] or [i].• Each press increases the number of skips.Starting from aselected titlePress the numbered buttons.• This works only when stopped (screen saver is displayed on the television ➔ right) with some discs.e.g., 5: [0] ➔ [5] (MP3, JPEG and TIFF discs only) 5: [0] ➔ [0] ➔ [5]15: [1] ➔ [5] 15: [0] ➔ [1] ➔ [5]Selecting groupsWhile stopped (screen saver is displayed on the television ➔ right)5: [5]Quick ViewThe play speed can be increasedwithout distorting the audio.Press and hold [q] (PLAY/x1.3).Press again to return to normal speed.Slow-motion(Motion picture parts only)While paused, press [t] or [y].• The speed increases up to 5 steps.• Press [q] (PLAY) to restart play.• Forward direction only.• The unit will pause if slow-motion play is continued for approximately 5 minutes.Frame-by-frame(Motion picture parts only)While paused, press [w] (w h) or [q] (h q).• Each press shows the next frame.• Press and hold to change in succession forward or backward.• Press [q] (PLAY) to restart play.• Forward direction only.Displaying the televisionimage as a picture-in-pictureSkipping the specifiedtime (Time Slip)1 Press [TIME SLIP].2 Press [e, r] to select the time and press [ENTER].Play skips the specified time.• Press [TIME SLIP] to show the play images in full.Manual SkipPlay restarts from approximately 30seconds later.Press [MANUAL SKIP].DVD-A CDCDDVD-ARAM-R -RW(V)RAM +R DVD-VDVD-A-RW(VR) VCDVCD-R -RW(V)RAM +R DVD-VDVD-A-RW(VR) VCD VCDPress [TIME SLIP].The unit displays the television image as apicture-in-picture.• You will hear the playback audio.• Press [TIME SLIP] again to cancel.• Time Slip does not work when the unit’s “TVSystem” settings are different from the titlerecorded on the disc.• You can change the channel being received bypressing [1 2 CH].• You cannot change the channel being receivedwhile recording.Play imagesCurrent receiving images-R -RW(V)RAM +R -RW(VR)-R -RW(V)RAM +R -RW(VR)Editing operations during playEraseErase titles during play.1 Press [ERASE].2 Press [w, q] to select “Erase” and press [ENTER].• A title cannot be restored once it is erased. Make certain before proceeding.• You cannot erase when recording at the same time.• The available recording space on DVD-R or +R does not increase when you erase titles.• Available recording space on a DVD-RW (DVD-Video format) increases only when the last recordedtitle is erased. It does not increase if other titles are erased.Create chapter(➔ page 28, Title/Chapter)Press [CREATE CHAPTER].Chapters are divided at the point pressed.• You cannot create chapters when the unit is in timer recording standby or EXT LINK standby.-R -RW(V)RAM +RRAM