SettingOptionOtherPosition [1 - 5]RAM -R -RW(V) +R-R DL -RW(VR)+R DL +RW DVD-A DVD-V DivXDialog Enhancer[Natural][Emphasis][Off][On] [Off]SettingOptionSoundV.S.S. RAM -R -RW(V) +R-R DL -RW(VR)+R DL +RW DVD-A DVD-VPlayback NRProgressiveTransfer.[On] [Off][On] [Off]Copy NR[Automatic][On][Off]SettingOptionPictureTitle Chapter OffTrack All OffCD VCDRAM -R +R-RW(V) -RW(VR)DVD-V+R DL-R DL +RWTrack Group OffPL (Playlists) OffDVD-A MP3RAM -RW(VR)Repeat Play [On] [Off]SettingOptionPlayDVDThe function is only available if the elapsed time is displayed.PAL output signalNTSC output signalReduces screen interference.Select [On] to activate full picture output.[Progressive - On] Select the appropriate conversion method for full-picture output.[Auto] Film and video content is detected and converted appropriately.[Video] If problems occur with the [Auto] setting.[Film] Select Video or Film if the video content is is not displayed correctwith the Auto setting.Position of the OSD displays on the screen.Surround sound effect with 2 front speakers. Only with Dolby Digital with2 or more channels. Switch off V.S.S. if this causes problems. V.S.S. doesnot work with recordings in dual-channel sound.Dolby Digital, only with 3 or more channels, including a center channel.The volume is increased so that dialogue is easier to understand.During playback of a playlistIf the Video-CD has playback control, select a track in modewith the number buttons.STOPPicture and sound settings[Auto 1] Film and video content is detected and converted appropriately.[Auto 2] Movies with different picture frequencies are converted[Video] If content does not display correct with the [Auto 1] or [Auto 2]settings.Reduces noise during tape recording. Only for AV1, AV2, AV3 or DV.Only with picture input from a video cassette.Noise reduction is activated for video input.The input signal can be recorded unchanged.55Setting