Panasonic Diga DMR-EX98V Operating Instructions Manual

Also see for Diga DMR-EX98V: Help guide

Contents

60RQT90903 When the top menu is displayedPress [e, r, w, q] to select the titleyou want to start copying, and press[OK].01/02010305020406My favoriteChapter 1Chapter 3Chapter 2Chapter 4While playing in order, all the titles after the selected title arerecorded until the set time. (After the last title on the disc hasfi nished playing the top menu is recorded until the set time isreached.)To return to the previous screenPress [RETURN].To stop copyingPress [g].You can also press and hold [RETURN] for 3 seconds to stop copying.y If stopped partway, copying will be up to that point.Notey The screen on the right is recorded at thebeginning.y The content is recorded as 1 title from the startof copy to the end.y If play does not begin automatically or if the topmenu does not display automatically, press [q](PLAY) to start.y Even if you copy a high quality video/audio DVD, the originalpicture and audio quality cannot be exactly replicated.y If you want to copy a title from a fi nalised DVD-RW (DVD VideoRecording format), create a copying list and then copy (➡ 58,Copying using the copying list–Advanced Copy).Copying a video cassetteVHS p HDD RAM -R -RW(V) +R +RWPreparation:y Insert a disc and video cassette that you can use for copying (➡ 17).y Confi rm that there is enough remaining disc space.y When copying an NTSC tape to a DVD, change the “TV System” to“NTSC” in the Setup menu (➡ 75). This unit cannot record NTSCsignals to discs that already have PAL signal recordings. (However,both types of programmes can be recorded onto the HDD.)After performing steps 1−5 (“Format” is automatically set to “VHS-Video”) (➡ 58, Copying using the copying list−Advanced Copy)1 Set “Copy Time”.y If you are not going to change the setting (➡ step 2).Setting the unit to copy according to the set time1 Press [e, r] to select “Copy Time”, then press [q].2 Press [e, r] to select “Time Setting”, then press [OK].y Setting the unit to copy all the content on the video cassette3 Press [e, r] to select “Off”, then press [OK].4 Press [w] to confi rm.y Setting the copying time3 Press [e, r] to select “On”, then press [OK].4 Press [e, r] to select “Copy Time”, then press [OK].002Cancel All1 Copy DirectionSet the time a few minuteslonger.Min.Copy2 Copy Mode3 Copy TimeVHS-Video SPVHS t DVDHour5 Press [w, q] to select “Hour” and “Min.”, then press[e, r] to set the recording time.6 Press [OK].7 Press [w] to confi rm.y You can also set the recording time with the numbered buttons.y You cannot set a recording period longer than 25 hours.VHS p -R -RW(V) +RPress [w, q] to select “Copy & Finalise” or“Copy Only”, then press [OK].y If “Copy & Finalise” is selectedAfter fi nalising, the discs become play-only and you canalso play them on other DVD equipment. However, you canno longer record or edit.2 Press [e, r] to select “Start Copying”,then press [OK].3 Press [w] to select “Yes”, then press[OK] to start copying.y Copying continues until the set time even if the playback ofthe programme you wish to copy fi nishes. Note that copyingis automatically stopped when the tape reaches the end orthe remaining capacity of the copy destination is fi lled.To stop copyingPress and hold [RETURN] for 3 seconds.(You cannot stop while fi nalising.)To return to the previous screenPress [RETURN].Notey To play DVD-R, DVD-RW (DVD-Video format) and +R on otherplayers, it is necessary to fi nalise them after copy.About FR modeWhen “Time Setting” is set to “Off” in step 1 (➡ left):y The recording mode is automatically selected by estimating theremaining capacity of the disc for copying of only the recordedparts in the video cassette (unrecorded parts will not be recorded).y When you press [OK] to start copy, the tape is automatically fast-forwarded to the end and then fast-rewound to the beginningbefore the copying is actually started. It may take time to startcopy. If the remaining capacity of the disc is insuffi cient, thecopying will be stopped in the middle.y The recording is divided into titles every time the tape indexsignals are detected.When “Time Setting” is set to “On” in step 1 (➡ left):y The recording mode is automatically determined by estimating theremaining capacity of the disc for copying of the contentsequivalent to the recording time set from the start point of thecopying on the video cassette (unrecorded parts will also berecorded).y The recording is not divided into titles.y SECAM recorded VHS tapes cannot be played on this unit.To copy a SECAM recorded VHS tape (➡ 28)Advanced Copy