Panasonic Diga DMR-EZ27 Operating Instructions Manual

Also see for Diga DMR-EZ27: Firmware instructions Operating instructions

Contents

9RQT8851Basic OperationsScheduled RecordingRefer to “Advanced Scheduled Recording” (➔ 16) for detailed information on scheduled recording.RAM -R -R DL -RW(V) +R +R DL +RWPreparation:• Turn on the television and select the appropriate video input to suit theconnections to this unit.• RAM If the disc is protected, release protection (➔ 44).• Insert a disc with enough remaining blank space.• Confirm that the clock on the unit’s display is set to the correct time.• If connected via a cable box or satellite receiver, set channel on thoseequipment before scheduled recording starts.to select the DVD drive.CANCELS SUB MENU Timer Off ASchedule List Remaining Recording Time3/26 Tue 12:53 PM1:58 SPDVDChannelNoPress ENTER to set new schedule.Date OnNew Scheduled RecordingOff Mode CheckENTERe, r to select “New Scheduled Recording”, thenw, q to move through the items and e, r to setthe items.Channel/Input – TV Station/External InputDate/Frequency – You can set a daily or weekly program.On (start time) / Off (end time)– Hold button to change in 30-minute increments.Mode – Recording modeName – Press [ENTER], see page 28.Channel, CaptionPreview of selectedchannelSCHEDULEDRECORDINGChannel/Input Date/Frequency--------On--:-- --Off--:-- --Mode--ENTERNameNumber--0 94-14-1 KPO-SDRemaining Recording Time3/26 Tue 12:53 PM1:58 SPDVDCancelSet Channel/Input.Repeat steps 3−5 to program other recordings.–when you have finished programming.“z” lights on the unit’s display.Scheduled recording can be started only when the unit is turned off.––NotesBe sure to perform step 6 before thescheduled recording time. When theunit is turned off, “z” lights on the unit’sdisplay to indicate scheduled recordingstandby has been activated.“z” flashes when the unit cannot go toscheduled recording standby. (e.g., arecordable disc is not in the disc tray)It does not flash if Quick Start is off.When scheduled recordings are set tostart one immediately after another, theunit cannot record the beginning of thelater program.If two scheduled recording timesoverlap, the first recording always haspriority. The second recording will startonly after the first recording has finished.When starting time for a scheduledrecording is the same, the recording thatyou programmed later has priority.If you set DST (Daylight Saving Time)to On when manually setting the clock,scheduled recording may be affectedwhen summer time switches to wintertime and vice versa.••••••TipsIcons such as “ RAM ” indicate usablediscs. Refer to pages 62 and 63.•