Panasonic Diga DMR-PWT420 Operating Instructions Manual

Also see for Diga DMR-PWT420: Operating instructions

Contents

Panasonic Diga DMR-PWT420 Operating Instructions Manual Manual pdf 19 page image

Getting startedVQT4E90 191 Turn on the TV, then select the appropriateAV input to suit the connections to this unit.2 Press [Í] on the remote control or [Í/I] onthis unit.• The Easy Setting will start at the initialpower on.• The Auto Setup screen appears. It takesabout 3 minutes.After tuning has been completed, clock willbe set automatically.• If the region selection screen appears,select repeatedly until you reach theavailable region.• If the clock setting screen appears, set thetime manually (> 82, Clock).3 Enter the PIN.This PIN will be used only for the OwnerID-Data Entry screen.1 Press the number buttons to enter 4-digitPIN.2 Repeat step 1 to confirm.• Make a note of PIN in case you forget it.The PIN number cannot be reset.• Steps 3 – 5 will be skipped in the EasySetting after “Shipping Condition”(> 83) is performed. (> go to step 6 onpage 20)4 Set the Owner ID-Data Entry (“NAME”,“HOUSE NO” and “POSTCODE”).e.g.,1 Select the item, then press [OK].2 Select the character, then press [OK].Repeat this step.3 Press [BACK/RETURN ].4 Repeat steps 1-3 to enter all data.5 Press [BACK/RETURN ] to exit fromthe Owner ID-Data Entry screen.5 Enter the new PIN for parental control.• The default PIN is “0000”.1 Select the number, then press [1] (right).Repeat this step.• Make a note of PIN in case you forget it.2 Press [OK] twice.Easy SettingProgressDVB Auto SetupCH 21 68CHFree TV: 2 Pay TV: 0 Data: 0Radio: 0SearchingActual number of channels may differ due to channel duplication.QualityTypeChannel NameRETURNThis will take about 3 minutes.35 101035Free TVFree TVOwner IDPlease enter new PINPIN0 PIN entry9You now have the opportunity to enter yourdetails and help the police to crack crime.See Instruction Book.* * * *RETURNOwner ID-Data EntryNAMEHOUSE NOPOSTCODEPIN 0000RETURNChange PINSelect0Number 9-PIN EntryEnter a new 4-digit PIN, then press OK.This PIN will be used for controlling viewing and playback.PIN will be set to “0000” by pressing “RETURN” when there is nonumber input.- - -RETURN