Record mode39LSQT0861Recording in natural colors(White balance)The automatic white balance function may notreproduce natural colors depending on the sceneor lighting conditions. If so, you can adjust thewhite balance manually.≥Set to Tape/Card Recording Mode.1 Set the [AUTO/MANUAL/FOCUS] switch to[MANUAL].2 Move the joystick down until the whitebalance indication appears. ([ ] etc.)3 Move the joystick left or right in order toselect the white balance mode.1) Auto white balance adjustment [ ]2) Indoor mode (for recording underincandescent lamps) [ ]3) Outdoor mode [ ]4) Manual adjustment mode [ ]ª To restore to the automaticadjustmentMove the joystick left or right until the [ ]indication appears. Or, set the [AUTO/MANUAL/FOCUS] switch to [AUTO].≥When the Camcorder is turned on with the lenscover closed, the automatic white balanceadjustment may not function properly. Pleaseturn the Camcorder on after opening the lenscover.≥When setting both the white balance and theiris/gain, set the white balance first.≥Whenever recording conditions change, re-setthe white balance for correct adjustment.ª To set the white balance manuallySelect [ ] in Step 3. Then, while viewing awhite subject on the entire screen, move thejoystick up to select the [ ] indication.ª About flashing of the [ ] indicationWhen the manual adjustment mode isselected≥Flashing indicates that the white balancepreviously adjusted is stored. This setting isstored until the white balance is adjusted again.When white balance cannot be set in themanual adjustment mode≥White balance may not be adjusted properly inthe manual adjustment mode in dark places. Ifso, use the auto white balance mode.During setting in the manual adjustment mode≥When the setting is completed, it will remain lit.ª About the white balance sensorThe white balance sensor detects the type of lightsource during recording.≥Do not cover the white balance sensor duringrecording, or it may not function properly.ª About the black balance adjustmentThis is one of the 3-CCD system functions thatautomatically adjusts the black when the whitebalance is set in the manual adjustment mode.When the black balance is adjusted, the screenwill temporarily be black.1 Black balance adjustment (Flashes.)2 White balance adjustment (Flashes.)3 Adjustment completed (Lights up.)AUTOMANUALFOCUSAWBMNLAWB1 1111)3)2)4)AWBAWBAWB1 2 3
