Panasonic EASA-PHONE KX-T123210 Installation Manual

Also see for EASA-PHONE KX-T123220: User guide Installation manual Station user's guide

Contents

Panasonic EASA-PHONE KX-T123210 Installation Manual Manual pdf 165 page image

DescriptionThis feature gives each message of the SMDRan account code of the called or calling party.[Station Message Detail Recording (SMDR) iscost saving feature that records all incomingand outgoing calls through the CO line. IThis feature has two modes “Forced” and“Option”.In the “Forced” mode, the account code mustbe entered every time the extension user dials.In the “Option” mode, the account code may beentered when a record of the account code isneeded.When setting to the “Forced” mode, see page3-70.The programmable feature (F3 only) button ofthe KX-T123250, KX-T61650 or KX-T30850 canalso be used for “Account Code” if programmingis done beforehand in the extension.For programming, see page 4-60.O~erati&Forced moden Making a Call1. Lift the handset or press the SP-PHONE2.3.4.5.0\.button.Press the CO button.The FWDI DND Indicator will flash.Press the FWDI DN D (or F3) button.“Enter ACCNT Code” will be displayed.The FWD/DND Indicator will light.Intermittent tone is heard.Dial the account code.Account code must be 4 digits.CO dial tone will be heard.Dial the phone number.You may dial 9 or 81 through 88 instead ofpressing the CO button.n Receiving a callIf you want to record a calling party’s accountcode in the SMDR, follow the below-mentionedprocedure.Within 30 seconds of finishing your conversationor while having a conversation,The FWD/DND Indicator will flash.1. Press the FWD/ DND (or F3) button.“Enter ACCNT Code” will be displayed.The FWD/DND Indicator will light.2. Dial the account code.Account code must be 4 digits.l Dialing the account code must be donebefore hanging up.Option Moden Making or Receiving a CallIf you want to record a calling or called party’saccount code in the SMDR, follow the below-mentioned procedure.Within 30 seconds of finishing your conversationor while having a conversation,1. Press the FWD/ DND (or F3) button.“Enter ACCNT Code” will be displayed.The FWD/DND Indicator will light.2. Dial the account code.Account code must be 4 digits.l Dialing the account code must be donebefore hanging up.ConditionsAccount code must be 4 numerical digitsexcept for the I‘#” and “Jo”button.If you enter the wrong account code, pressthe FWD/ DND button and enter the correctcode.If account codes are programmed withtelephone numbers for one touch dialing orsystem speed dialing, you need not to dialan account code when making a call.Program as follows.4-40