– 4–2 –4.1.5. Spurious Emissions at Antenna Connector4.1.6. Residual Peak PowerEqual to or less than 70 dBc (BW = 300 kHz)4.2. Rx Characteristics4.2.1. SensitivityE-GSM 900 Full Rate SpeechThe reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is appropriate)is specified in the following table, according to the propagation conditions.The reference sensitivity level is < -102 dBm.NOTE: 1 < _ < 1.6. The value of a can be different for each channel condition but must remain thesame for FER and class 1b RBER measurements for the same channel condition.Limits(dBm)Frequency Range FrequencyoffsetFilterBandwidthApproxVideo B/W E-GSM 900 GSM1800/1900100KHz to 50MHz - 10KHz 30KHz -36 -3650 to 500MHz - 100KHz 300KHz -36 -36500MHz to 1GHz 0 to 1MHz 100KHz 300KHz -36 -361 GHz to 12.75 GHzExcl. relevant TX bandE -GSM:880 to 915 MHzDCS:1710 to 1785 MHz-and the Rx bands925 -960 MHz1805 -1880 MHz0 to 10MHz>10MHz>30MHz(off trom edgeof relevant Txband)100KHz300KHz3MHz300KHz1MHz3MHz-30-30-30-30(1.0 -1.710GHz)-36(1.710 -1.785GHz)-30(1.785 -12.75GHz)Relevant TX band:E -GSM:880 to 915 MHzDCS:1710 to 1785 MHz1.8 to 6.0 MHz> 6.0MHz30KHz100KHz100KHz300KHz-36-36-36-36ChannelsPropagationconditionsTU highPropagationconditionsRAPropagationconditionsHTStatic ConditionsTes t Limiterror rate%MinimumNo ofsamplesTest Limiterror rate%MinimumNo ofsamplesTest Limiterror rate%MinimumNo ofsamplesTest Limiterror rate%MinimumNo ofsamples16400020,000,0008200TCH/FS FERClass lb (RBER)Class ll (RBER)6.742*_0.42/_8.3389001,000,000120,0007.5 24000 9.33 600000.122*_0.41/_2.439