– 5–2 –5.1.5. Spurious Emissions at Antenna Connector5.1.6. Residual Peak PowerLimits (dBm)FrequencyRangeFrequencyOffsetFilterBandwidthApprox.Video B/W E-GSM 900 GSM 1800Equal to or less than 70 dBc (BW = 300 kHz)5.2.1. SensitivityE-GSM 900 Full Rate SpeechThe reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is appropriate)is specified in the following table, according to the propagation conditions.Channels PropogationConditions TUhighPropogation ConditionsRAPropogation ConditionsHT Static ConditionsTestLimiterrorrate %MinimumNo. ofsamplesTest Limiterror rate%MinimumNo. ofsamplesTest Limiterror rate%MinimumNo. ofsamplesTestLimiterrorrate %MinimumNo. ofsamplesTCH/FS FERClass lb (RBER)Class ll (RBER)6.742∗_0.42/_8.3389001,000,000120,0007.5 24000 9.333 600000.122∗_0.41/_2.43916400020,000,0008200The reference sensitivity level is < –102 dBm.5.2. Rx CharacteristicsNote: 1 < α< 1.6.The value of αcan be different for each channel condition but must remain the same forFER and Class 1b RBER measurements for the same channel condition.100 kHz to 50 MHz – 10 kHz 30 kHz –36 –3650 to 500 MHz – 100 kHz 300 kHz –36 –36500 MHz to 1 GHz 0 to 1 MHz 100 kHz 300 kHz –36 –361 GHz to 12.75 GHz 0 to 10 MHz 100 kHz 300 kHz –30 –30 (1.0 – 1.710 GHz)Excl. relevant TX band: > 10 MHz 300 kHz 1 MHz –30 –36 (1.710 – 1.785 GHz)E-GSM: 880 to 915 MHz; > 30 MHz 3 MHz 3 MHz –30 –30 (1.785 – 12.75 GHz)DCS: 1710 to 1785 MHz (offset from edge of– and the RX band relevant TX band)925 – 960 MHz1805 – 1880 MHzRelevant TX band: 1.8 to 6.0 MHz 30 kHz 100 kHz –36 –36E-GSM: 880 to 915 MHz; > 6.0 MHz 100 kHz 300 kHz –36 –36DCS: 1710 to 1785 MHz