Using Withhold ID it is possible to check if you sendCalling Line Identification information when you make acall. When checking the Status of Withhold ID thetelephone must be registered with a network.Call Charge will set the cost of each unit for call chargeinformation and the required currency in which callcharge is displayed.Using Max. Cost can restrict use of the telephone to aspecified number of units.NOTE:The duration of one unit may vary during the day,peak and off-peak times. Therefore, the call charge canbe calculated accordingly. However, call chargeinformation may not give an accurate reflection of thetariffs charged by your Service Provider.Call DivertWhen Call Divert is enabled the divert icon (t) isdisplayed.You can divert voice, fax and data calls using differentcircumstances and to different telephone numbers.When updating or checking the Status of Call Divert thetelephone must be registered with a network.SecurityThere are three types of security code for yourtelephone:Lock Code: Controls telephone security – Phone Lock.Factory-set to “0000”.PIN: Controls SIM security.PIN2: Controls security for Fixed Dial Store and CallCharge metering.It is recommended that you memorise your securitycodes. If you need to make a note of your security codes,never write them in a way that they can be recognised byanother person. If you forget them contact your dealer forthe lock code or your Service Provider for PIN and PIN2.Phone Lock will prohibit normal operation of thetelephone. Only emergency calls can be made andreceived calls answered. Once the Phone Lock is25Call Divert Voice CallsFax CallsData CallsCancel AllStatusSecurityBar VoiceBar FaxBar DataCancel AllStatusPasswordPhone LockCall BarPINPIN2Fixed DialBarred Dial