Panasonic EB-GD75 Operating Instructions Manual

Also see for EB-GD75: Service manual

Contents

Enabling/Disabling the PIN1 From Idle Z Q, select Phone Menu > Security > PINZ Q2 Use a select Enable / Disable or Change PIN Z Q3 Enter PIN (Between 4 and 8 digits)Z QSetting Vibration AlertWhen required, the phone can be set up to vibrate when a call is received.Vibration alert enables the user to choose between Continuous,Intermittent vibration alerts when a call is received. Switching on vibrationalert will silence the ring volume. If, however, the ring volume is adjustedafter the vibration alert is switched on, or the Discreet Mode is switchedon, (see “Setting Discreet Mode” page 11 ) and its profile enables ringtones, the phone will ring and vibrate when a call is received.From Idle Z Q, select Personalise > Vibration Alert.Choose the vibration setting required, Continuous, Intermittentor Disable, Z QWhen activated, the phone will vibrate briefly.Note: When Discreet Mode is enabled, it’s profiles will supercede those ofthe Vibration alert.Setting Discreet ModeDiscreet Mode will allow the user to choose between “Vibrate only”, “ringtone only” or both.1 From Idle Z Q select Personalise > Discreet ModeZ Q2 Use e to select Ring Volume or Vibration Z Q3 Use e to select the required vibration type or ring tone volume4 Z Q to select the required vibration type or ring tone volume5 Z+ Hold #Note: If the ring tone volume is increased beyond “Max” volume it will setan escalating ring tone.11Basic Operation