Panasonic EB-X400 Operating Instructions Manual

Also see for EB-X400: Operating instructions Service manual

Contents

81TroubleshootingShould any problem persist, contact your dealer.Problem Cause RemedyPhone will not switch on. Check that the battery is fully charged andcorrectly connected to the phone.Extremely short battery lifefor a new battery.The network you are usingand the condition of thebattery can affect battery life.Short battery life for an oldbattery.The battery has worn out. Replace with a new fully charged battery.The charging indicator doesnot light, the battery levelindicator does not appearand the phone cannot beswitched on when charging.The battery is not attached tothe phone or, when thebattery has been deeplydischarged, the phone willtake a short time until theindicator lights.Leave the phone charging the battery for afew minutes before the indicator lights andyou attempt to switch the phone on.Battery fails to charge. The battery is not attached tothe phone.Ensure the battery is fitted to the phone priorto commencing charging.Battery was attached to thephone after the Fast TravelCharger was connected.Calls cannot be made. Keyguard is on. Disable Keyguard.Outgoing calls are barred. Disable outgoing Call Barring or barreddialling.The phone is not registeredon a network.Move to a coverage area and operate yourphone after it has registered with a network.Calls cannot be made fromFixed Dial store.Check whether your SIM supports FixedDial. Check if Fixed Dial is switched on.Check whether the phone number is storedin Fixed Dial.Calls cannot be received. The phone is not switchedon.Switch the phone on.Incoming calls are barred. Disable incoming Call Barring.The phone is not registeredon a network.Move to a coverage area and operate yourphone after it has registered with a network.Emergency calls cannot bemade.You are not in a GSMcoverage area.Check that the antenna symbol ( ) isdisplayed – move to a coverage area andoperate your phone when the antennasymbol is displayed.