Panasonic EB-X70 Operating Instructions Manual

Also see for EBX70 - CELL PHONE: Operating instructions Technical information Service manual Service manual

Contents

127 Connectz Subscribe to fax service.z Install Bluetooth ® on your computer. See Installing Bluetooth® on your computer onpage 125.z Pair your computer with your phone. See Pairing your computer with your phone onpage 125.z Install fax software on your computer, e.g. WinFax Pro (www.symantec.com).z Install the Data Connection Software on your computer. See Installing the DataConnection Assistant software on page 125.z Set up your computer’s fax application software to send and receive faxes via yourphone. Ensure that you select the Panasonic X70 Bluetooth® modem port in yourFax application.Infrared dialupYou can use the infrared connection to transfer information between X70 and anotherdevice with an infrared port. You can also use the infrared connection betweenyour phone and your computer to access the Internet and to send and receive faxes fromyour computer.Preparing for infrared connectionPlace your phone and the other device within the effective range of the infraredconnection. Ensure that there are no obstructions between the two devices. Ensure that the infrared ports of the devices point at each other. If you use a PC, you need to set up infrared connection on the PC.For example, Start > Settings > Control Panel > Infrared > Options Tab> Enable Infrared Communication.Sending objects via infraredYou can send data from Contacts List, Data Folders, Business Card.For Contacts List, select > Contacts List > Browse > Infrared.For Data Folders, highlight the object you want to send. Press Q. Select Infrared.For Business Card, select Organiser > Business Card > Infrared.Press B or E to stop the transmission at any time.Receiving objects via infraredFrom the Connect menu select Receive ObjectThe phone waits for incoming data from either Bluetooth ® or infrared port.To save the received data, select Save and choose the folder which you want to save therequired data in.Menu > Connect