Panasonic ET-DLE030 Operating Instruction

Also see for ET-DLE030: Operating instructions

Contents

Panasonic ET-DLE030 Operating Instruction Manual pdf 5 page image

ENGLISH-5Guide groove Lens mount coverPositioning guideFixed-focus lens1) With the lens mount cover thatcame with your projector attached,align the positioning guide on thelens with the guide groove on theprojector, and insert the lens fully.zThere is a red dot at the bottom right end of thepositioning guide.2) Rotate the lens clockwise until youhear a “click”.Attentionz Gently turn the projection lens counterclockwiseto check that it will not fall out.BALens mount coverACBLens releasebutton1) Turn the lens mount covercounterclockwise to detach it fromthe lens and slide it towards thefront end of the lens.2) Hold down the lens releasebutton while turning the lenscounterclockwise to release it.3) Turn the lens mount coverclockwise to reattach it.Attentionz Attach the supplied lens cap before storing the lens.Detaching the LensAttaching the LensAttaching the Lens / Detaching the Lens (continued)* Unless specified otherwise, the illustrations in these operating instructions show the lens used with thePT-DZ870 projector.