6-ENGLISHMaking lens shift adjustments (Using projector functions)Use the projector to make vertical and horizontal adjustments of the lens.Making Adjustments1) Turn on the projector to start theprojection.2) Press the the [MAIN MENU] screen. Thenselect [PROJECTOR SETUP] andpress the button.3) Select [SERVICE PASSWORD] inthe [PROJECTOR SETUP] menuand press the button.4) In the [SERVICE PASSWORD]entry screen, press the numericbutton <0> and <3> on the remotecontrol to enter "030" and pressthe button.zThe [DLE030 POSITION] screen appears.5) Press the button in the[DLE030 POSITION] screen.z[PROGRESS] is displayed on the [DLE030POSITION] screen and lens position movesto the standard projection position for the ET-DLE030.Notez This method of adjustment does not work with the PT-DZ770, DW740, DX810, DZ680, DW640, DX610, DW730,DX800, DZ6710, DZ6700, DW6300, D6000 and D5000. Use the supplied lens shift gauge for adjustments.z Lens position adjustments made from the projector may deviate slightly from adjustments made using the lensshift gauge.z After returning the lens to the standard projection position, lens shift adjustments are possible within the rangewhere the projector will not interfere with the edges of the projected image.z If the rear of the projector blocks the bottom edge of the projected image, it may also obscure the view of anOn-screen display (OSD) that is positioned at the lower edge of the screen. If this happens, open the [DISPLAYOPTIONS] menu and select [ON-SCREEN DISPLAY] --> [OSD POSITION] to change display location so thatthe whole OSD menu can be seen.z The menu screens shown in these operating instructions are only provided as examples. Actual menu screensmay vary with the specific model.LAST USEDSW1234567ET-LAD120DISABLEDEFAULT1.001.00ACTIVATED2/2PROJECTOR SETUPSTARTUP INPUT SELECTRS-232CSTATUSNO SIGNAL SHUT-OFFREMOTE2 MODEFUNCTION BUTTONDATE AND TIMELENS CALIBRATIONSAVE ALL USER DATALOAD ALL USER DATAINITIALIZESERVICE PASSWORDLENSDLE030 POSITIONOKCANCELMENUENTERMAIN MENUPICTUREPOSITIONADVANCED MENUDISPLAY LANGUAGEDISPLAY OPTION3D SETTINGSPROJECTOR SETUPTEST PATTERNSIGNAL LISTSECURITYNETWORKMENU SELECTSUB MENUP IN PENTER
