Precautions for use4 - ENGLISHPrecautions for userAsk a qualified technician or your dealer when installing the interface board to theMulti Window Processor.Be sure to ask a qualified technician or your dealer when installing the interface board to the Multi Window Processor. Staticelectricity may cause malfunctions.rInterface board for input and outputTo use the Multi Window Processor, you need to install at least one interface board for input and one interface board for output.DisposalTo dispose of the product, ask your local authorities or dealer for correct methods of disposal.Product listProduct name Model No. RemarksInterface Board for DVI-U2input ET-MCYDV100 This is the interface board with 2 inputs for DVI-U signals.Interface Board for DVI-U2output ET-MCQDV150 This is the interface board with 2 outputs for DVI-U signals.Interface Board for 3G-SDI2input ET-MCYSD200 This is the interface board with 2 inputs for 3G-SDI signals.Interface Board for HD/SD-SDI 4input ET-MCYSD210 This is the interface board with 4 inputs for HD/SD-SDI signals.Interface Board for DigitalLink 2output ET-MCQDL350 This is the interface board with 2 outputs for DIGITAL LINKsignals.Installing the interface boardBe sure to ask a qualified technician or your dealer.r To the equipment installer:Before you begin, make sure to read “Read this first!” (x page 2).Precautions for installing and removing the interface boardf Make sure to turn off the power before attaching or removing the interface board to/from the Multi Window Processor.f Do not touch the connecting part of the interface board directly.g Doing so may result in static electricity that damages components.f To prevent damage by static electricity, touch a metal object nearby to remove electrostatic charge on your body before you begin.f Be careful to avoid injury when installing or removing the interface board.g If touched by mistake, lead lines of parts, traces of soldering, and other sharp areas on the surface of the interface board may causeinjury to the hand.g If touched by mistake, empty slot openings on the Multi Window Processor and edges of the interface board brackets may cause injury tothe hand.f Install the interface board to the Multi Window Processor by slowly and securely inserting it horizontally into the connector.g Incorrect attachment may result in failure to operate or malfunction.