Panasonic EUR7722KN0 Operation Manual

Contents

dvd player

DVD RECORDERThe factory setting is [1].Change the unit’s remote control code tomatch the remote control code of the DVDrecorder.For about one second hold down both[ENTER] and the button ([1], [2] or [3])which is the same number as the remotecontrol code set by the DVD recorder.When using a PanasonicDVD recorderCheck the remote controlcode of the DVD recorder.Preparations:Switch on the televisionand select inputSwitch offSwitch on the recorderand start playSkip items during playShow recordermenusShow disc menus Select and entermenu itemsStop playClear the menus or return tothe previous menuPause playTo view frame-by-frameSearch through the discStart play from a selected itemWatching DVDsOperating the DVD recorderOperating the DVD recorderSelect driveThe factory setting is [9].1. Press [DVD RECORDER].2. While pressing [ENTER], press andhold [8] for approximately2 seconds.After performing the followingoperations, press this button again.Start slow-motion playSwitch onIf it does not changeTo returnIn step 2 above, while pressing [ENTER],press and hold [9] for approximately2 seconds.3

/ 6

Related manuals for Panasonic EUR7722KN0