Panasonic EX-10 Series Specification Sheet

Also see for EX-10 Series: Instruction manual User manual

Contents

specifications

231EX-1012 to 24 V DC10 % Ripple P-P 10 % or less<NPN output type>NPN open-collector transistor• Maximum sink current: 50 mA• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1 V or less (at 50 mA sink current)0.4 V or less (at 16 mA sink current)<PNP output type >PNP open-collector transistor• Maximum source current: 50 mA• Applied voltage: 30 V DC or less (between output andV)• Residual voltage: 1 V or less (at 50 mA source current)0.4 V or less (at 16 mA source current)DC-12 or DC-13Incorporated0.5 ms or lessRed LED (lights up when the output is ON)Green LED (lights up under stable light received condition orstable dark condition)3 (Industrial environment)IP67 (IEC)25 to55 C 13 to131 F (No dew condensation or icing allowed), Storage:30 to70 C 22 to158 F35 to 85 % RH, Storage: 35 to 85 % RHSunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving faceEN 50081-2, EN 50082-2, EN 60947-5-21,000 V AC for one min. between all supply terminals connected together and enclosure20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times eachRed LED (modulated)Enclosure: Polyethylene terephthalateLens: Polyalylate0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft longExtension up to total 50 m 164.042 ft is possible with 0.3 mm 2 , or more, cable(thru-beam type: emitter and receiver).Thru-beam Thru-beam • with operation mode switch on bifurcationFront sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensingEX-11A(-PN) EX-11EA(-PN) EX-13A(-PN) EX-13EA(-PN) EX-19A(-PN) EX-14A(-PN) EX-15 EX-15E EX-17 EX-17EEX-11B(-PN) EX-11EB(-PN) EX-13B(-PN) EX-13EB(-PN) EX-19B(-PN) EX-14B(-PN) (Note 2) (Note 2) (Note 2) (Note 2)NPN open-collector transistor• Maximum sink current: 100 mA• Applied voltage: 30 V DC or less(between output and 0 V)• Residual voltage: 1.5 V or less(at 100 mA sink current)• Residual voltage: 0.4 V or less(at 16 mA sink current)"0.1 mm "0.004 incopper wireSetting distance:10 mm 0.394 in"2 mm "0.079 inopaque objectSetting distance betweenemitter and receiver:1 m 3.281 ftTypeLight-ONItem Dark-ONSensing rangeMin. sensing objectHysteresisRepeatability(perpendicular to sensing axis)Supply voltageCurrent consumptionOutputUtilization categoryShort-circuit protectionResponse timeOperation indicatorIncident beam indicatorStability indicatorPollution degreeProtectionAmbient temperatureAmbient humidityAmbient illuminanceEMCVoltage withstandabilityInsulation resistanceVibration resistanceShock resistanceEmitting elementMaterialCable (Note 4)Cable extensionWeightAccessoriesSPECIFICATIONSModelNo.(Note 1)150 mm 5.906 in"1 mm "0.039 in opaque objectSetting distance betweenemitter and receiver:150 mm 5.906 in500 mm 19.685 in 1 m 3.281 ft2 to 25 mm 0.079 to0.984 in (Note 3)(Conv. point: 10 mm 0.394 in)15 % or less ofoperation distance0.1 mm 0.004 inor lessConvergent reflective(Diffused beam type)0.05 mm 0.002 in or less0.05 mm 0.002 in or lessOrange LED (lights up when the output is ON),located on the bifurcationRed LED (lights up under light received condition),located on the receiverGreen LED (lights up under stable light received conditionor stable dark condition), located on the receiver20 mA or less 30 mA or lessEmitter: 10 mA or less, Receiver: 15 mA or less150 mm 5.906 in 500 mm 19.685 in( ) "2 mm "0.079 in opaque objectSetting distance betweenemitter and receiver:500 mm 19.685 in( ) "1 mm "0.039 in opaque objectSetting distance betweenemitter and receiver:150 mm 5.906 in( ) "2 mm "0.079 in opaque objectSetting distance betweenemitter and receiver:500 mm 19.685 in( )( )Mounting screws: 1 set Mounting screws:1 setEmitter: 20 g approx., Receiver: 20 g approx.Enclosure: Polyethylene terephthalateLens: Polyalylate, Bifurcation: Polyalylate0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifur-cation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)Extension up to total 100 m 328.084 ft ispossible with 0.3 mm 2, or more, cable.Mounting screws: 1 set, Adjusting screwdriver: 1 pc.55 g approx.20 g approx.Notes: 1) Model Nos. having the suffix ‘-PN’ are PNP output type.Notes: 2) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).Notes: 3) The sensing range of convergent reflective type sensor is specified for white non-glossy paper (5050 mm 1.9691.969 in) as the object.Notes: 4) The flexible cable type (model Nos. having suffix ‘-R’) has a 0.1 mm 2 3-core (thru-beam type emitter : 2-core) flexible cabtyre cable, 2 m 6.562 ft long.Environmental resistance( )