Panasonic EY6406 Service Manual

Also see for EY6406 - CORDLES DRILL&DRIVER: Instruction manual Service manual Service manual Instruction manual

Model EY6406 • EY6407 • EY6431Ref. No. 2B Procedure 2A—2B Removal or attachment of the motor.Gear box bl ckBlackWhite(Removal of the motor.)1. Remove the motor with the gear box block fromhousing.2. Separate the motor from the gear box block bytwisting the motor to unlock tabs.(Attachment for the motor.)3. Motor mounting base and the positioning rib ofgear case should be set. (See Fig. 6)Fig.6Ref. No. 2C Procedure 2 A—2B- Removal or attachment of the gear box block.Planet gear B Thrust plateRing gear A _ carrier ACarrier B \ /**+ aPlanetgearB _Pin Planet qe A\ Carriera?Driving blockFling gearClutch Clutchspring plateoono oo_2-o3F°oo°Steel ball(Removal of the gear box block.)1. Turn the thrust plate to remove.2. The internal parts of gear box block can beremoved one after another.(See Fig. 7)(Attachment for the gear box block.)3. If the lock ring comes out, reassemble in thecorrect direction. (See Fig.8)4. Start from inserting 6 pins into the driving blockas shown in the Fig. 9.5. Assemble the other parts in reverse order asshown in the Fig. 7.NOTE : Carrier, Carrier A and B, Ring gear,and Ring gear A have their owncorrect directions for properreassembly.Fig.7ftInsert todriving ^block.o.LTFig.8Lock ringDriving blockFfg.9-3-