Panasonic EY6803 Operating Instructions Manual

Also see for EY6803 - HAMMER DRILL DRIVER 12V: Operating instructions Operating instructions

Contents

specifications

- 9 -. ACCESSORIESCAUTION:To prevent the risk of injury, only use accessory or attachment for its stated purpose.Bit adapter•EY9HX403Drill chuck (Optional accessory)•EY9HX400Hammer chuck (Optional accessory)•EY9HX401Battery pack•EY9201 (Ni-MH)Battery charger•EY0110If you need any assistance for more details regarding these accessories, ask yourlocal service center.. USAGE SUGGESTION1. If there isn’t enough force pushing down on the bit, the hammer may not be able toblow in hammering mode.This is to prevent the hammering mode from operating with no load. Press downharder on the bit to engage the hammer and cause it to blow.Always be sure to press down with enough force when working.. In winter or in other situations where the temperature of the unit is low (5°C orbelow), the blow of the hammering mode may be weaker than normal at thebeginning stage.This is because the grease becomes stiffer in low temperatures, increasing friction.If this should happen, operating hammering mode with no load for approximately30 seconds and repeat this 3 times. This will restore its blowing power.. SPECIFICATIONSMAIN UNIT (EY6803)Maximum drillingdiameterConcrete 10 mm (5/64") *1.5 mm (15/3")*For work that can be completed with one battery pack.Steel 13 mm (33/64")Motor voltage 1 V DCSpeed at no load (RPM) 0-1000 /min (rpm)Blows rate per minute (BPM) 0-4000 /min (bpm)Weight (with battery pack) .5 kg (5.5 lbs)Dimensions (L×W×H) 249×57×64 mm (10"×10-1/8"×-1/")EY6803(EU).indb 9 2006/04/10 9:41:34