Panasonic EY7410 Operating Instructions Manual

Also see for EY7410 - DRILL DRIVER 3.6V: Operating instructions Operating instructions Operating instructions

Contents

- 10 -The orange standby lamp will beflashing until the battery cools down.Charging will then begin automati-cally.5. When charging is completed, thecharging lamp will start flashing quick-ly in green color.6. If the power lamp does not light im-mediately after the charger is plug-ged in, or if after the standard charg-ing time the charging lamp does notflash quickly in green, consult an au-thorized dealer.LAMP INDICATIONSGreen LitCharger is plugged into the AC outlet.Ready to charge.Green Flashing QuicklyCharging is completed. (Full charge.)Green FlashingBattery is approximately 80% charged. (Usable charge.Li-ion only)Green LitNow charging.Orange LitBattery pack is cool.The battery pack is being charged slowly to reduce theload on the battery. (Li-ion only)Orange FlashingBattery pack is warm. Charging will begin when temper-ature of battery pack drops.Charging Status LampLeft: green Right: orange will be displayed.Both Orange and Green Flashing QuicklyCharging is not possible. Clogged with dust or malfunc-tion of the battery pack.If the temperature of the battery pack is –10°C or less,the charging status lamp (orange) will also start flashing.Charging will begin when the temperature of the batterypack goes up (Li-ion only)7. If a fully charged battery pack is in-serted into the charger again, thecharging lamp lights up. After severalminutes, the charging lamp may flashquickly to indicate the charging iscompleted.

/ 12

Related manuals for Panasonic EY7410 - DRILL DRIVER 3.6V