Panasonic EY7950LR2S Operating Instructions Manual

Also see for EY7450: Operating instructions Operating instructions Service manual Operating instructions Operating instructions

Contents

- 13 -VII. MAINTENANCEUse only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine,or other volatile solvents for cleaning.In the event that the inside of the tool or battery pack is exposed to water, drain andallow to dry as soon as possible. Carefully remove any dust or iron filings that collectinside the tool. If you experience any problems operating the tool, consult with a repairshop.Use only bits suitable for size of drill's chuck.IX. APPENDIXMAXIMUM RECOMMENDED CAPACITIESModel EY7450 EY7950ScrewdrivingMachine screw M8Wood screw ø 10 mm or ø 6.8 mmSelf-drilling screw ø 6 mmDrillingFor Wood ø 36 mmFor Metal ø 13 mmFor Masonry ø 13 mmX. SPECIFICATIONSMAIN UNITModel EY7450 EY7950Motor voltage 18 VNo load speed Low 0 - 430 min-1High 0 - 1650 min -1Blows Rate Per Minute Low --- 1800 - 7740 min -1High --- 6840 - 29700 min -1Chuck capacity ø 1.5 mm - ø 13 mm (1/16 - 1/2)Clutch torque Approx 1.0 N m - 6.9 NmOverall length 218 mm (8 - 9/16") 235 mm (9 - 1/4”)Weight (with battery pack) 2.15 k (4.7 lbs) 2.3 k (5.0 lbs)BATTERY PACKModel EY9L50Storage battery Li-ionBattery voltage 18 V DC (3.6V x 10 cells)EY7442_7450_7950(UL).indb 13 2011-2-17 11:48:05

/ 14

Related manuals for Panasonic EY7450