Panasonic FP2 Manual

Also see for FP2 Series: Programming manual Product manual Technical manual Technical manual User manual

Panasonic FP2 Manual Manual pdf 45 page image

SpecificationsFP2−CCU6 − 36.1 Specifications6.1 SpecificationsGeneral SpecificationsItem SpecificationsAmbient temperature 0 to 55 °C/32 to 131 °FStorage temperature –20 to +70 °C/– 4 to + 158°FAmbient humidity 30 to 85 % RH (at 25°C non−condensing)Storage humidity 30 to 85 % RH (at 25°C non−condensing)Vibration resistance 10 to 55 Hz, 1 cycle/min.: double amplitude 0.75 mm (0.03 in.),10 min. on 3 axesShock resistance Min. 98 m/s 2 , 4 times on 3 axesNoise resistance 1000 V p−p, 50 ns, 1 μs pulse widths (based on in−house measurements)Operating condition Free of corrosive gases and excessive dustComputer Communication Unit Performance SpecificationsItem SpecificationsInterface Two RS232C portsTransmission distance Max. 15 m/49.212 ft *1Transmission speed (Baud rate) 19,200/9,600/4,800 bits/s, selectable using DIP switchCommunication method Half duplexSynchronous method Start−stop synchronous methodTransmission code ASCIITransmission data format Stop bit: 1−bitParity: Valid (odd)Character bits: 7−bit/8−bit, selectable using DIP switchData transmission order 0 bit first in units of charactersEnd terminal code CR (0DH)Computer linking Message Header (%) to terminator (CR) Once transmission rights from thehost computer are received, com-Maximum message length Max. 118 characters/frame(including “%” and “CR”)host computer are received, communication is started. The commu-nication protocol is MEWTOCOL−COM.Current consumption 60 mA or less (at 5 V DC)Weight Approx. 120 g/4.233 oz*1: The value is given as 15 m/49.212 ft. in the specifications, but if used in an environment with a high noise level,communication may be unstable. Check the conditions using the actual device.NoteThis unit does not support extension header (<). Use the MultiCommunication Unit.