19 Getting Started5 Setup WindowsFollow the on-screen instructions. The computer restarts several times. After the computer is turned on, the screen remains black orunchanged for a while, but this is not a malfunction. Wait for amoment until the Windows setup screen appears. Setup of Windows will take approximately 5 minutes.Go to the next step, confirming each message on the display. You can set the Wireless Network after the setup of Windows is complete. If “Let’s connect you to a network” is displayed, select [Skip fornow]. “Join a wireless network” screen may not appear.CAUTION You can change the user name, image and security setting aftersetup of Windows. Use standard characters as a computer name: numbers 0through 9, uppercase and lowercase letters from A to Z, and thehyphen (-) character. Do not use the following words and charac-ters for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 toCOM9, LPT1 to LPT9, LPT, &, space.If the error message “The computer name is not valid” appears,check if characters other than the above are not entered. If theerror message still remains on the display, set the key entrymode to English (“ENG”) and enter characters.6 Restart the computerA Touch (Start).B Touch (Power) - [Restart]. A portion of the Panasonic PC Settings Utility functions will be enabledafter the computer restarts.NOTE When the “Emergency notification setting” screen appears, readthe on-screen messages carefully. Follow the on-screen instruc-tions. You can set the “Emergency notification setting” after thesetup of Windows is complete.7 Update the on-screen manualA Connect to the internet. Sign in to Windows as an administrator.For further information, refer to OPERATING INSTRUC-TIONS - Connect to a network.B Update the on-screen manual.Touch (Start) - [Panasonic PC Manual Selector].Follow the on-screen instructions.