Panasonic FZ-N1 Series Operating Instructions Manual

Also see for FZ-N1 Series: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

3. When necessary, tap ® [Advanced], select the desired feature and configure it as desired.– [Finger sensitivity]: Set the sensitivity required for the screen to respond to touch operations. If thesensitivity is high or the screen is wet, select a lower setting. If you feel that the sensitivity is low,select a higher setting.– [Stylus pen type]: Select the type of stylus pen (active type or passive type). When using both,select [Active and Passive pen].– [Active pen pressure]: Set the pen pressure required for an active type stylus pen to respond.– [Glove thickness]: Set the screen sensitivity according to the glove thickness.– [Coordinates offset]: Set the amount of coordinate offset when operating with gloves. When set to[Auto], the offset is automatically set according to the [Glove thickness] setting.– [Rain condition]: Set according to the amount of rain falling on the screen, i.e., how wet the screenis.• When [Rain condition] is set to [Heavy], “tap and hold” operations are limited to 2 seconds.Note• You can also turn touch operation modes on or off by tapping [Stylus pen] / [Glove touch] / [Rainsensing touch] in the power options menu (see “Power options menu” (page 39)). In addition, youcan use the [UserButtonManager] app to assign these features to the unit’s buttons (see“[UserButtonManager] app” (page 40)).• Turn glove touch mode off when you are not wearing gloves.• Even if glove touch mode is enabled, the unit may not be able to be operated while wearing certaintypes of gloves.• When rain sensing touch mode is enabled, the screen operates in single-finger touch mode (i.e.,only one finger press is recognized at a time) and responds by being firmly pressed with a finger.• Even if rain sensing touch mode is enabled, the unit may not be able to be operated or may notrespond properly to touches when the entire screen is wet or depending on the amount of water onthe screen. Temporarily put the unit to sleep mode and wipe the water off of the screen.Remaining battery level display of active type stylus pens (certain models only)While an active type stylus pen is in use, its remaining battery level is detected and displayed with an iconin the following colors.Replace the battery when the icon is displayed in red.Remaining battery level: highRemaining battery level: mediumRemaining battery level: lowNote• To detect the remaining battery level, set [Stylus pen type] to [Active pen only] or [Active andPassive pen].• The remaining battery level of active type stylus pens is detected when an active type stylus pentouches or comes close to the screen. (It may take several seconds for detections to be made.) Theremaining battery level is not detected if there is no remaining power in the battery or if a battery isnot inserted.Operating Instructions - Reference Manual 43Settings