Panasonic GP-MF852PT Operating Instructions Manual

ModeRear Panel Switch1. Newly developed 2/3” double speed progres-sive scan type CCD image sensor with 768(H) x 494 (V) pixels.2. External synchronization :External HD/VD input enables system setupwith external video processors, etc.4. Frame reset with Read out Inhibit (R/I)control :R/I control (this controls the timing of ReadoutInhibition from CCD) enables to capture thesame timing pictures from two or more cam-eras into one image memory.5. In all camera function modes, high speedFEATURESThe Panasonic GP-MF852PT Double Speed Machine Vision Camera has a 2/3” Interline Transfer CCDimage sensor which features 380 000 pixels, a horizontal resolution of 500 lines, and minimum smear.5. Clean the CCD faceplate with care.Do not clean the CCD with strong or abrasivedetergents. Use lens tissue or a cotton tippedapplicator and ethanol.6. Never face the camera towards the sun.Do not aim the camera at bright objects.Whether the camera is in use or not, neveraim at the sun or other extremely brightobjects. Otherwise, blooming or smear maybe caused.7. Do not drop anything inside the camera.Dropping metal for example inside the cam-era could permanently damage the unit. Ifanything is dropped inside the camera, turnthe power off immediately and ask a qualifiedservice person for servicing.8. Do not operate the camera beyond thespecified temperature, humidity or powersource ratings.Use the camera under conditions where tem-perature is between −10°C - +50°C (14°F -122°F), and humidity is below 90 %.The input power source is DC 12 V, 465 mA.PREFACEBefore attempting to connect or operate this product,please read these instructions completely.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION:TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (ORBACK), NO USER SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.The exclamation point within anequilateral triangle is intended toalert the user to the presence ofimportant operating and mainte-nance (servicing) instructions in theliterature accompanying the appli-ance.The lightning flash with arrowheadsymbol, within an equilateral trian-gle, is interned to alert the user tothe presence of uninsulated "dan-gerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons.WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TORAIN OR MOISTURE.The serial number of this product may be found onthe top of the unit.You should note the serial number of this unit in thespace provided and retain this book as a perma-nent record of your purchase to aid identification inthe event of theft.Model No.Serial No.SA 1966SA 1965VIDEO1ON2 3 4 5 6 7 8rewt y i o !0 !1 uqMAJOR OPERATING CONTROLS AND THEIR FUNCTIONSq 2/3” Manual Iris Lens (Sold Separately)w Camera Connector (12-pin)This is connected with the optional CameraCable GP-CA34 , GP-CA33, GP-CA59 or GP-CA60.N1098-0 YWV8QA5088AN Printed in JapanN 30Warning:This equipment generates and uses radio frequen-cy energy and if not installed and used properly,i.e., in strict accordance with the instruction manu-al, may cause harmful interference to radio com-munications. It has been tested and found to com-ply with the limits for a Class A computing devicepursuant to Subpart J of Part 15 of FCC Rules,which are designed to provide reasonable protec-tion against such interference when operated in acommercial environment.For U.S.AMachine Vision CameraGP-MF852PTRemove dust on the faceplate of filter glassbefore mounting the lens on the camera.q ow !0 ie !1 u!2r t yPin No. Description1 Ground2 +12V IN3 Ground for Video Out4 Video Out5 Ground for HD6 HD IN7 VD/V reset8 Ground9 No connection10 No connection11 No connection12 Ground for VDCAUTION: CONNECTTHIS TO A DC 12 VCLASS 2 POWERSUPPLY ONLY.3. Video Output ConnectorThis connector is used to connect with theVIDEO IN connector of the monitor.8. Rear Panel Switch No.4 (4/ON) 4 ON9. Rear Panel Switch No.5 (5/ON) 5 ONThese switches (Rear Panel Switch No. 4, 5,6, and 7) are used to set the shutter speed.The shutter speed changes according to themode which is set by the Rear Panel SwitchNo. 2, 3, and 8.10. Rear Panel Switch No.6 (6/ON) 6 ON11. Rear Panel Switch No.7 (7/ON) 7 ONThe shutter speed can be set as below:No.4 No.5 No.6 No.7OFF OFF OFF OFFON OFF OFF OFFOFF ON OFF OFFON ON OFF OFFOFF OFF ON OFFON OFF ON OFFOFF ON ON OFFON ON ON OFFOFF OFF OFF ONON OFF OFF ONOther CombinationsMode 7 Mode 2-5Normal Not SpecifiedNot SpecifiedNot SpecifiedNot SpecifiedNot Specified1/30 0001/15 0001/8 0001/4 0001/2 0001/30 0001/15 0001/8 0001/4 0001/2 0001/1 0001/5001/2501/100Not Specified Not Specified

/ 2

Related manuals for Panasonic GP-MF852PT