3Safety precautionsSafety precautionsindicates safety information.1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not install near any heat sources suchas radiators, heat registers, stoves, or otherapparatus (including amplifiers) that produce heat.8) Protect the power cord form being walked on orpinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.9) Only use attachments/accessories specified bythe manufacturer.10) Use only with the tripod or table specified by themanufacturer.11) Unplug this apparatus during lightning storms orwhen unused for long periods of time.12) Refer all servicing to qualified service personnel.Servicing is required when the apparatus hasbeen damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled orobjects have fallen into the apparatus, theapparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and theapplicable safety instructions listed below. Keep these operating instructions handy for future reference.IMPORTANT SAFETY INSTRUCTIONSDeclaration of Conformitywith the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substancesin Electrical and Electronic Equipment(adopted by Order №1057 of Cabinet of Ministers of Ukraine)The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain HazardousSubstances in electrical and electronic equipment (TR on RoHS).The content of hazardous substance with the exemption of the applications listed in the Annex №2 of TR on RoHS:1. Lead (Pb) – not over 0,1wt % or 1000wt ppm;2. Cadmium (Cd) – not over 0,01wt % or 100wt ppm;3. Mercury (Hg) – not over 0,1wt % or 1000wt ppm;4. Hexavalent chromium (Cr6+) – not over 0,1wt % or 1000wt ppm;5. Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm;6. Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm.