Panasonic GP-VD150E Operating Instructions Manual

Also see for GP-VD150E: Operating instructions

Panasonic GP-VD150E Operating Instructions Manual Manual pdf 9 page image

8 (E)ENGLISHInstallation precautionsIn addition to heeding the points presented in the “Safety precautions”, observe the following precautionsas well.Ensure that the installation work complies with thetechnical standards governing electrical equipment.This unit is for indoor use only.It cannot be used outdoors.Avoid installation in a location where the unit will be exposedto direct sunlight for extended periods or near a cooling orheating appliance.Otherwise, deformation, discoloration, malfunctioning and/orproblems in operation may result. Operate the unit where itwill not be splashed or sprayed by water.Use this unit on a flat and level surface.Do not install the unit on the surface of a wall, on a ceiling orin a location where the unit will end up being inclined at anangle.pp Do not hold the camera head while undertaking theinstallation work. Doing so may cause malfunctioning.OK NGNoteConcerning the installation locationInstall the unit in a stable location which will not besusceptible to shaking. If the unit is installed in a locationwhich is susceptible to shaking, this will cause the unit’simages to shake in turn.Install the unit after conferring in detail with your dealer.Do not install or use the unit in the following kinds oflocations.pp On the surface of a wall (where the unit will be installedsideways and/or where the unit will be secured to the wallusing a mounting bracket)pp On a ceiling (where the unit would be installed so that it ispointing downward)pp In locations (including places such as under the eaves ofa building) where the unit would be directly exposed torain or waterpp In locations such as kitchens where there are highconcentrations of steam and greasepp In outdoor locations or hot places where the temperaturewill exceed 40 °Cpp In cold locations where the temperature will drop below0 °Cpp In locations where the humidity will exceed 85 %pp In locations where chemicals are used such as nearswimming poolspp At sea, in coastal areas or in locations where corrosivegases are emittedpp In locations where radiation, X‑rays, or strong radiowaves or magnetic fields are generatedpp In locations where the unit would be subject to a greatdeal of vibration such as on board a vehicle or ship (thisunit is not designed to be used in vehicles)pp In locations where the temperature is subject to suddenchanges such as near the air outlet of an air conditioneror near a door which allows the outside air to come inWhat to avoid to ensure that the unit will perform stablyover a prolonged periodpp Using the unit for a prolonged period in a location withhigh temperature and humidity levels will cause its partsto deteriorate and shorten its service life.pp Ensure that a cooling unit or heating unit will not blow anyair directly toward the installation location.When the unit is no longer going to be used, do notleave it lying around, but be absolutely sure to disposeof it properly.When installing, transferring or disposing of the unit, beabsolutely sure to hold it by its pedestal area.Problems may result if the camera head is held or rotated.Do not attach a filter, hood, extender or other parts tothe unit.