Panasonic H-37PWD7UY Operating Instructions Manual

Panasonic H-37PWD7UY Operating Instructions Manual Manual pdf 20 page image

20Adjusting PICTURE POSITION / SIZENORMALNORMALIZEPICTURE POS. /SIZEV-POSH-POSV-SIZEH-SIZECLOCK PHASE1 Press to display the PICTURE POS. /SIZE menu.Press to adjust POS. / SIZE.Press to exit from adjust mode.Press to select H-POS / H-SIZE / V-POS / V-SIZE / CLOCK PHASE.During “VIDEO (S VIDEO)”,“COMPONENT” and “DVI” input signal.During “RGB / PC” input signal.32Notes:• Adjustment details are memorized separately for different input signal formats(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625(575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i,750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for eachfrequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the pictureposition will shift up or down. This picture position movement cannot be controlledby the PICTURE POS. / SIZE function.• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,the adjustment is not memorized. When exiting the mode, the screen will return toa former adjustment.While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time orthe ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( N/ NORMALIZE Normalization)Adjust the horizontal size.Adjust the vertical size.H-POSV-POSAdjust the horizontal position.Adjust the vertical position.H-SIZEV-SIZECLOCK PHASE(RGB/PC in mode)Eliminate the flickering and distortion.4 RPICTUREPOS. /SIZENORMALNORMALIZEPICTURE POS. /SIZEV-POSH-POSV-SIZEH-SIZEN RINPUTSURROUNDVOLPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCMULTIPIP SWAP SELECT MOVEZOOM