Panasonic HC-MDH2 Operating Instructions Manual

Also see for HC-MDH2: Basic operating instructions

Contents

- 95 -≥ When using the Eye-Fi card for recording, the maximum size of a file that can be recorded onother media also follows the setting of this menu.≥ When [REC FORMAT] is set to [SX 576/50i], the maximum file size will be limited to 2 GB even if[Eye-Fi FILE SIZE] is set to [4GB].∫ Using the [Eye-Fi Power Management] functionSet the power source for Eye-Fi transfers.≥ Change the mode to .Select the menu.≥ The Eye-Fi menu only appears when an Eye-Fi card is used.≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due tochanges to the card specification etc.≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with theEye-Fi card before use.≥ When the endless memory function of the Eye-Fi card is set to on, the files transferred from thecard may be deleted automatically.≥ The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of anEye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.≥ The Eye-Fi setting can be checked while pausing the recording.* These are displayed only when [Eye-Fi DIRECT] is used.≥ If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fiagain from the menu.≥ When using the Eye-Fi card, please be sure to unlock the write-protect switch. (l 16)≥ Before deleting the files, please confirm they have been transferred to your PC and uploaded tothe sharing site.≥ Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such asinside aircraft etc.≥ Depending on network conditions, the transfer may take some time. Also, if network conditionsdeteriorate, the transfer may be suspended.: [SW & DISP SETUP] # [Eye-Fi Power Management] # desired settings[BOTH]: Eye-Fi transfers are possible with either the AC adaptor or the battery.[AC]: Eye-Fi transfers are possible only when the AC adaptor is in use.Displayed icons Eye-Fi setting[Eye-Fi TRANSFER] is set to [OFF](White)/ *(White) [Eye-Fi TRANSFER] is set to [ON] and the unit is notconnected to the network.(Green)/ *(Green) [Eye-Fi TRANSFER] is set to [ON] and the unit isconnected to the network or is transferring a file./ * [Eye-Fi TRANSFER] is set to [ON] and a file transferhas been interrupted.MENU