78VQT3Y11∫ Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting an AV multi cable.≥ Images are dubbed in standard quality.≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Change the mode to .1 Connect this unit to a video device and start playback on this unit.2 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on therecorder.≥ If the date and time display and function indication are not wanted, cancel them beforedubbing. (l 33, 69)≥ Turn off the operation icon by pressing the ENTER button when dubbing (l 30).≥ For setting when connecting the AV multi cable, refer to page 70.Dubbing in standard picture qualityChange the video input on the videodevice and TV that this unit isconnected to.≥ The channel set will differ depending on theterminal to which the unit is connected.≥ See the operating instructions of the videodevice for details.≥ Insert the plugs as far as they will go.≥ Do not use any other AV multi cables exceptthe supplied one.A AV multi cable (supplied)≥ If your recorder is not equipped with AV InputSockets, the 21-pin Adaptor B (optional) isnecessary. Consult your dealer.If the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction of the device you are connecting to or readthe operating instructions of the wide-screen TV and set the aspect ratio to 16:9.AV MULTI
