28SQT0665 (ENG)Using [Link to Cell] with a direct connection≥ Set the NFC function of the smartphone to on.1 Start up the smartphone application “Image App”.2 Touch the smartphone on of this unit.≥ Touch the NFC touch area when the NFC mark is displayed onthe smartphone screen.≥ If this is the first time the smartphone is connecting to this unit,touch [YES] on the screen of this unit, and then touch thesmartphone on of this unit again.≥ If the unit is not recognized even when touching the smartphone,change positions and try again.≥ The connection cannot be established while this unit is recording.≥ When the connection is complete, images of this unit is displayed on the smartphone screen.≥ This unit is turned on even if it touches the smartphone on of this unit, where this unit isturned off with a LCD monitor.1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].2 Touch [Direct Connection].3 Touch [Change connection type] and select [QR code]≥ QR code is displayed on the screen of this unit.4 Start up the smartphone application “Image App”.5 On the smartphone, select [QR code] to scan the QR code displayed on thescreen of this unit.(If the device is Android)≥ The connection will be completed. The image from this unit will be displayed on the smartphone screen.(If the device is iOS)≥ Follow the steps below:1 Select the option that allows you to install the app on the profile screen of the “Image App”, andfollow the on-screen instructions to complete the installation.2 Press the home button to close the displayed screen.3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.The connection will be completed. The image from this unit will be displayed on thesmartphone screen.≥ When you cannot scan the QR code, refer to “Connecting by entering an SSID and Password” inthe Owner’s Manual (PDF format).≥ Transmission speed may decrease, or may not be usable depending on the environment it is used in.Use NFC to set up a direct connection between this unit and thesmartphone.Scan a QR code to set up a direct connection between this unit andthe smartphone.