95VQT3W38Connecting with a HDMI mini cableSelect the desired method of HDMI output.≥ [AUTO] determines the output resolution automatically based on information from theconnected TV.If the images are not output on the TV when the setting is [AUTO], switch to the method[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Pleaseread the operating instructions for the TV.)≥ Image will not display on TV for a few seconds in the following cases.j When the 1080/50p recording mode is turned on/off during Motion Picture RecordingModej When you touch the play mode select icon to select [1080/50p] and then touch [ENTER]during Playback Mode.j When the 1080/50p or 1080/50i scenes are switched.Connecting with the AV multi cableSelect the desired setting of AV multi connector output.Changing the component output setting≥ Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the componentterminal to confirm the recording. (l 51): [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]: [SETUP] # [AV MULTI] # desired setting[COMPONENT]: When connecting to the component terminal[AV OUT]: When connecting to the video terminal: [SETUP] # [COMPONENT OUT] # desired setting[1080i]: When connecting to the component terminal on the TV compatible with1080i.(Playback is in high definition quality.)[576i]: When connecting to the component terminal on the TV compatible with 576i.(Playback is in standard quality.)MENUMENUMENU
