65VQT3W31Switch the picture quality and recording format of the motion pictures to record.*1 Recording will have higher quality in the order of [HA], [HG], [HX] and [HE].*2 It can record with highest quality image in this unit.*3 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended when using a Mac.≥ Recordable time using the battery (l 22)≥ This function’s default setting is [HG] mode.≥ Please refer to page 149 about approximate recordable time.≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.It is possible to continuously record motion picture to an SD card when there is no spaceavailable in the built-in memory. (It allows you to record only to SD card from built-inmemory.)≥ Set [MEDIA SELECT] to [Built-inMemory].≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/60p].≥ Insert an SD card.≥ is displayed on the screen. will disappear when space in the built-in memory isgone and the recording to the SD card starts.≥ Relay Recording can only be performed once.≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE]into the SD card. (l 99, 108)≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recordingfunction again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENECOMBINE], a message is displayed. You will be able to perform Relay Recording bytouching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] afterthat.≥ Still pictures are recorded to the SD card after Relay Recording.≥ is displayed on the thumbnail display during the playback of a scene that was relay-recorded on the built-in memory.[REC MODE]: [RECORD SETUP] # [REC MODE] # desired setting[HA]/[HG]/[HX]/[HE] *1: Set the recording mode to 1080/60i.[1080/60p] *2 : Set the recording mode to 1080/60p.[iFrame] *3 : Set the recording mode to iFrame.[RELAY REC]: [RECORD SETUP] # [RELAY REC] # [ON]MENUHC-V500MMENU
