228.3. Disassembly Procedure for theUnit8.3.1. Removal of the Side Case (L) Unit(Fig. D1)No. Item Fig Removal1 Side Case (L) Unit (Fig. D1) 1 Screw (A)2 Screws (B)(Fig. D2) 3 Screws (C)3 Locking tabsSide Case (L) Unit2 Top Case (Fig. D3) 1 Screw (D)(Fig. D4) 3 Locking tabsTop Case3 Front Case Unit (Fig. D5) 1 Screw (E)2 Screws (F)(Fig. D6) 1 Screw (G)P6002 (Connector)FP6003 (Flex)3 RibsFront Case Unit(Fig. D7) NOTE: (When Installing)4 Lens Frame Unit (Fig. D8) 2 Screws (H)3 Screws (I)2 Locking tabs1 RibFP6004 (Flex)Lens Frame Unit5 Camera Lens Unit (Fig. D9) FP6008 (Flex)3 ConvexesPP301 (Connector)Camera Lens Unit6 Main P.C.B.SD Holder P.C.B.(Fig. D10) P6003 (Connector)3 Screws (J)1 Screw (K)(Fig. D11) Heat Radiation Frame Unit1 Projection partRear AngleFP6001 (Flex)P6401 (Connector)FP6402 (Flex)2 Ribs1 Hooking partFP3201 (Flex)(HC-V500M only)(Fig. D12) SD Holder P.C.B.Main P.C.B.(Fig. D13) NOTE: (When Installing)7 ESD P.C.B.(HC-V500M only)(Fig. D14) 2 Screws (L)ESD P.C.B.8 LCD Case (T) UnitLCD Unit(Fig. D15) 2 Screws (M)2 Screws (N)(Fig. D16) 6 Locking tabsLCD Case (T) UnitFP901 (Flex)1 Screw (O)1 Hooking partLCD Unit