- 56 -Switch the picture quality and recording format of the motion pictures to record.*1 Recording will have higher quality in the order of [HA], [HG], [HX] and [HE].*2 It can record with highest quality image in this unit.*3 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended for when using aMac.≥ Recordable time using the battery (l 11)≥ This function’s default setting is [HG] mode.≥ Please refer to page 155 about approximate recordable time.≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.It is possible to continuously record motion picture to an SD card when there is no spaceavailable in the built-in memory. (It allows you to record only to SD card from built-inmemory.)≥ Set [MEDIA SELECT] to [Built-inMemory].≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/50p].≥ Insert an SD card.≥ is displayed on the screen. will disappear when space in the built-in memory isgone and the recording to the SD card starts.≥ Relay Recording can only be performed once.≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE]into the SD card. (l 95, 107)≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recordingfunction again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENECOMBINE], a message is displayed. You will be able to perform Relay Recording bytouching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] afterthat.[REC MODE]: [RECORD SETUP] # [REC MODE] # desired setting[HA]/[HG]/[HX]/[HE] *1: Set the recording mode to 1080/50i.[1080/50p] *2 : Set the recording mode to 1080/50p.[iFrame] *3 : Set the recording mode to iFrame.[RELAY REC]: [RECORD SETUP] # [RELAY REC] # [ON]MENUHC-V707MMENU
