- 164 -5 Select [Set connect. dest.] of the smartphone.6 Enter the Device ID and Password displayed on the screen of this unit intothe smartphone.≥ When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOSdevice).≥ If you want to check the Device ID and Password after performing Step 7, on the screen of thisunit, touch [Setup] # [Home Monitor Connect].7 Touch [ENTER] on the screen of this unit≥ Check that the message “Connecting...” has disappeared from this unit.8 On the smartphone, select [Start Home Monitor] to start home monitoring.∫ When configuring the home monitor settings using QR code1 Press Wi-Fi button on this unit and touch [Hom.Monitor].2 Touch [QR code].≥ QR code is displayed on the screen of this unit.3 Turn off the Wi-Fi setting of the smartphone.4 Start up the smartphone application “Image App”.≥ (If the device is Android)When a Wi-Fi connection guidance screen is displayed, select [No].≥ (If the device is iOS)If a confirmation message for the Wi-Fi setup is displayed, select [Close].5 Enable the home monitoring setting from the menu of the smartphoneapplication “Image App”.≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use HomeMonitor].6 Select [Set connect. dest.] of the smartphone.7 On the smartphone, select [QR code], and scan the QR code displayed on thescreen of this unit.≥ A device ID and password will be created. Select [OK] (on your Android device) or [Complete] (onyour iOS device).8 Touch [NEXT] on the screen of this unit.≥ Check that the message “Connecting...” has disappeared from this unit.9 On the smartphone, select [Start Home Monitor] to start home monitoring.To exit [Hom.Monitor]:Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.
